This is the Pedestal table I’ve got for 90$ second hand. I loved the legs but The top was very scratched. I didn’t liked the Dark cherry color Also.
Dining Table Makeover
if you are a wood dining table lover, this project is definitely the one you are looking for. When i first moved in my new house, i immediately pictured a beautiful oak dining table in my ding room. When I stated searching on line and in the stores for a 6 or 8 chairs dining table, i was shocked by the high cost they are. I started hunting on facebook market palace. Then, bingo i. Found the one I fell in love with it. I’ve got it for 90 dollars, what a wonderful price for a dusted piece of jewelry. I couldn’t wait when I could start to work on it. After i finished working on the table, it was just looking as fancy as a table priced at 1000$. I was so proud of it. And i sent pictures to the previous owner as she asked me to do. She was very moved by the result and all the love we gave to that table.
this pedestal legs have very pretty Curves, but I was very skeptical to sand it. It’s required lots of time and energy. But can you imagine hw beautiful they will be refinished.
I start sanding with my sanding machine. While I was working with my sanding machine i noticed that the process went very slow. I tried with a regular sanding paper and the work went faster. Don’t feel that the sanding machine gonna do a better work. Your muscles might be much better. How to use sanding paper: i started with A medium 80-120 to remove the stain.Then a fine 150-180 before finishing. Finally the very fine 220-250 between stains. That’s means, when you finish staining and you feel its not absolutely smooth. Sand with the very fine paper until obtaining the desired lever of smoothness. I know that’s seems very hard and long process, but believe me, ones you will see the result You’ll forget everything and you’ll be very proud of your stunning dining table.
Very important to wipe Down the excess of dust coming from sanding. Also, this way you can see how much you are sandIng and where you have to sand more or less.
The most challenging part to sand, were the Legs. Lots of curves and details it has to be completely sand. It Is a time consuming work, but I considered that as a therapeutic Activity.
Honestly, the table looks very clean and bright like this. Something in my head was telling me to leave it like that. But, no, i can’t do that? Right?!!let’s go to the next step:
i used this stain: Mission oak color. Because I wanted to be more golden color then brown or red.
With a piece of cotton cloth, i start staining it very gently. Put a little amount of saint of the cloth and start padding and wiping to cover the surface. I was applying very thin layer to not go dark . Let it dry some hours, or follow the instructions on the can. Very important to add the Table leave if there is any, so you can get the same level of sanding and color on it.
This step is the final step. I used a semi-gloss Polyurethane. “Oil-based polyurethane is better for a tabletop than the water-based version. Oil-based polyurethane dries harder and creates an impenetrable surface that protects the woodagainst moisture and food stains. An oil-based coat of polyurethane will last longer than a water-based coat.” Google voila, this is my advice to you is to use an oil based not water based polyurethane.
Ahhh! This step is so satisfying. I Used a big brush for that to make sure That I’m covering all the areas.
After finishing the table, I didn’t had to sand the whole thing again. Just a little section where Was lots of scratches before I resend it to smooth it as possible As I could. How it looks so far?
- Dining table (Marketplace facebook)
- Sand paper (Lowes)
- Stain (Home Depot)