Transfers to scrub off onto board?
how can I get the flower transfer that you scrub off on board.I would like to make my daughter and grandaughter a stove cover and cant find where to order the stencil to rub off on the board, Please help me, I want to make these for d=christmas gifts
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
How do I open this tube?
The end of this tube is very hard. I slightly tried to punch the end of a knife into it and also tried a large paper clip but neither budged it. I was a bit timid in ... See more
Do all sewing machines have a presser foot tension regulator?
I am a mid to intermediate level seamstress. I've had two machines over the past 40 years, a Kenmore, followed by a White sewing machine, both very nice sewing machi... See more
How can I stiffen crepe paper?
HelloIs there anyway I can stiffen crepe paper leaves?
What type of saw and blade's do i need to slice/ cut agates?o
How do you glue the plastic that water bottles are made of ?
What kind of glue works with polyethylene plastic ? I have tried many kinds with no success.
Hi! I'm not sure which project you are asking about. It's usually best to ask your question at the bottom of the post to get the right answer. If you didn't save the project, use the search box at the top of this page, using key words. I found several 3D projects listed, by typing in stencil, and raised stencil. I even found one using 3D in the title. Hope that helps. Good luck!
Check out Michaels and Hobby Lobby
Hello you might consider looking here
https://www.redesignwithprima.com/product-category/decor-transfers/
Amazon carries these from Iron Orchid Designs and transfers:
https://www.amazon.com/s?k=iron+orchid+transfers&hvadid=77859235876463&hvbmt=be&hvdev=c&hvqmt=e&tag=mh0b-20&ref=pd_sl_lf71uppwz_e
Or you can can look up: https://ironorchiddesigns.com/decor-transfers/
Sounds like a wonderful project.
Check Michael's, Hobby Lobby, and Amazon for vinyl transfers. You might also consider a stencil that you can paint.
You should find what you are looking for right here: https://amzn.to/38YbTBw
Here's how to use the mod podge photo transfer to wood method: https://www.hometalk.com/diy/craft/ornaments/barn-christmas-ornament-using-mod-podge-photo-transfer-33557500
Barn Christmas Ornament Using Mod Podge Photo Transfer
If you cannot find the transfers, I would get a picture of what you want to put on top of the board and mod podge it on. This way you could even put their pictures on it if you want or a cartoon character or Snow White etc.
Amazon and craft stores sell them.
You only need ask the question once. I see this is the third post with the same question. It will show up on the forum after you post.
you can buy flower transfers at any craft store and it will have instructions on how to apply also there is an item available at walmart and craft stores called wallies that are all kinds of designs you apply them with water https://www.amazon.com/Wallies-Wallpaper-Cutouts-Pkg-Flower-Fairies/dp/B000B6SXHK
https://www.amazon.com/Stencils/s?k=Stencils
I used the rub on transfers on this project. https://www.homeroad.net/2020/05/make-scrap-wood-table-riser.html. There is a link to the company and it comes in all kinds of designs.
Here are a variety of wood transfers. https://amzn.to/392SUWQ
Maybe there is something over here that you like? https://amzn.to/3pOvwC9
Check amazon or craft stores