DIY Modern House Number Sign With Planter Box

2 materials
$25
1 Day
Easy

Easy dIy modern house number sign with a box you can use as a planter or mailbox.

We have yet to replace our house number sign since we renovated 8 years ago. It’s about time to stop driving our guest crazy looking for our house and finally make it easier for them.

I spotted array of awesome house number planter boxes on pinterest and immediately fell in love with the idea. My son Kyle also liked the looks of this sign and wanted to take on this project. I said go for it!


Let’s get started…

TOOLS
  • Circular saw or for straightest cut use a table saw
  • Brad nailer
  • Measuring tape
  • Carpenter’s square
  • Clamps
  • Brush
  • Drill
  • Drill and 1/8” Drill Bit
  • Sanding blocks
MATERIALS
  • 2ft by 2ft plywood
  • Varathane wood stain (Ebony)
  • Polyurethane
  • Wood Glue
  • Wood filler
  • House Numbers
  • Small plant or succulant

How to DIY modern house number sign with planter box

First, gather all your supplies needed for your diy modern house number planter box. We had all the supplies leftover from other projects so we only had to purchase the house numbers which we bought from  Home Depot.

Cut the plywood to the specific sizes for each panel using the circular saw or table saw.


Then attach the two side panels to the front panel using smear of wood glue on the edges. Then use the brad nailer to nail the panels together. Finally, attach the bottom piece and the back panel using the same method. Use the wood filler to cover the nails and sand the box to prepare for the stain.

Kyle used Ebony color by Varathane to stain the wood. It works well with the dark trim of the outdoor lights and gives a perfect contrast to the exterior of the house.


Once the stain is completely dry, the box was sealed with 3 coats of polyurethane to protect against the outside elements.

Determine how you want the numbers to appear on the box. Measure approximately 1-1/2″ from the top and mark where to drill the holes for the screws. Then, pre-drill the holes and screw in the numbers.

Satin Nickel finish house numbers added a perfect contrast to the planter box and can be easily visible from the street.

The box was sealed with 3 coats of polyurethane to protect against the outside elements.


Kyle drilled approximately 10 holes on the bottom for drainage so that the plant would not get root rot. I love the way it turned out… Kudos to Kyle, he did a great job!


You can see more diy and design ideas on my blog.

Resources for this project:

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info
Houzewize.com
Want more details about this and other DIY projects? Check out my blog post!
Go

Questions on this post

Have a question about this project?

Your comment...

Comments

Join the conversation

 9 comments
Your comment...
Next