1.6K Views
Pressure Washing Tips
![Paul Parker](https://cdn-fastly.hometalk.com/media/member_100000479475587276197_100000479475587_1964733424_n_05528e568bd42fec19626f5c7aa26fe8.jpg?size=91x91)
by
Paul Parker
(IC: homeowner)
I have customers that want to know "How" i get it so clean. Cleaning outsides is more chemicals than pressure. Yes some jobs need the pressure.But most are just in need of cleaning. Instead of using the Chemical injector part of my Pressure Washer.I use a Pump Up Sprayer to apply my Chemicals.This gives me more control over how much i apply. Depending on what i am cleaning a basic mixture is 40% Water 40% Bleach and 20% Vinegar.**This mixture can take your breath,so please use caution** Lets say were cleaning a house for painting.Lets pre wet the entire house.Apply our mixture and in some cases re apply. You need to let the Chemicals do the work.This takes between 10 and 20 mins.Be sure to rinse off all chemicals to ensure proper bonding of your paint. In worse cases you may need to get a stiff brush to help remove stubborn stains with the help of the pressure. Please dont aim the pressure at window.Some Pressure washers can easily break the glass.You can take the tip out, release the pressure and rinse windows safely.When you replace the tip, aim at the ground because sometimes the tip comes off..Good Luck
Enjoyed the project?
Published October 22nd, 2012 3:30 PM
Comments
Join the conversation
2 of 7 comments
-
Paint-N-Plus on Oct 22, 2012
-
-
Paint-N-Plus on Oct 22, 2012
-
Frequently asked questions
Have a question about this project?