Vintage Glass Pane Door Headboard

6 Materials
$150
2 Days
Medium
I'll admit it. My guest room is my favorite room in the house. It is beach themed and so inviting and while I have never slept in there, I am always looking for unique ways to add to the decor. So when I picked up a vintage glass panel door (like this one) from an antique fair, a wave of inspiration came over me. See what I did there? Beach. Wave. 😂


First I had to sand down the painted parts a bit. Luckily, in the end I wanted it weathered looking so that meant I didn't have to spend too much time with the sander. I just needed to get the chips and any slivers taken care of.


Then it was off to Home Depot to pick up one each of the following:
1x4x8 (cut in half)
2x4x8 (cut in half)
1x6x8 tongue & groove plank.


Then I sandwiched the door between boards on either side, with the 1x4s in the front and 2x4s in the back and secured them with 4" wood screws (make sure to drill your pilot holes first). This created "legs" and then I attached the tongue & groove plank to the top for a shelf.


Next came the painting. I applied a light coat of watered down antique white latex paint over the whole thing (covering the window panes with paper and tape to aid in clean up) and then once dried, I applied a little magic that I learned restoring furniture.
In this jar is a solution of white vinegar and steel wool that has been curing in my cabinet for years. When a small amount is applied to plain wood or even lightly painted wood, the most amazing, natural looking weathering happens right before your eyes.
Check out this 10 minute time-lapsed example.


Update: If you dont have this magic potion already on hand just grab a jar and put a wad of genuine steel wool (not SOS pads) and top it off with distilled white vinegar and let it do its chemical magic for 2-3 days. The longer it sits the darker it will get.
This is what it looks like over the white washing. See how the bits of exposed wood soaked up the solution and darkened?


The pis de resistance came when I attached the custom sized beach poster from www.murals.com to the back. I could not believe my eyes how beautiful this was.  But before that... safety first.
I recruited the hubs in bolting the two sides to studs in the wall because this bad boy is hea-vy but boy-oh-boy he is worth it.


Update: I would not suggest attaching this to a standard bed frame for fear of it falling over and making for a really bad visit for both you and your guests.


Here is the finished product!


The only thing left to do was to grab a cup of tea and my book and finally spend the night in the beach guest room. Which I did, all by myself and let me tell you, it was wonderful.
Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
3 of 10 questions
  • Per33817111 Per33817111 on Jul 22, 2018

    Did u remove the glass?

  • Kimberly Kifus Kimberly Kifus on Aug 27, 2018

    The finished product shows two rows of Windows in the door but the before picture shows three rows. Did you take out panes and cut third row out? Btw, love it!

  • Mark Smallwood Mark Smallwood on Jan 27, 2022

    How did you attach the pic?

Comments
Join the conversation
2 of 109 comments
Next