Side Table Made With Paint Buckets

5 Materials
$15
3 Hours
Easy

I have an addiction for recycling old paint buckets! This time I made side tables ... In the past I also made some cool shelves and a practical stool!

Cut the bottom of two plastic bucket, one at 3 in. and a second at 1 1/2 in. Cut both bucket bottom with a saw (yep, it works). Try to cut as straight as possible. Once it's done, sand the edges.

To screw the feet, you need to drill holes on the sides. You must calculate to have the same distance from one to another (bucket's circumference divided by 3). In the largest, the 3in. one, you have to make 6 holes (two for each foot).

To make the table legs you will need three dowels (1 1/4 in. radius) of 25 in. long. You must screw the dowels with the buckets pieces. The largest on the top, with the dowels inside the bucket. Then +/- 14in. below the smallest piece.

Time to make the tray. I cut a circle in a triplex panel. I used a jigsaw. If you don't have one, I guess you can make your panel cut at your hardware store.

It just remains to fix the tray with the legs. Place the tray upside down on the floor and put feet on it (upside down too). Measure to center the legs on the panel and trace. Screw the base and the tray together.

And done! You can paint o vanish the plywood top the way your like. You will find more pictures and details on my blog

Suggested materials:
  • Plywood
  • Plastic bucket
  • Paint
See all materials
Amaryllis
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  3 questions
  • Doreen Doreen on Apr 22, 2016
    Love the look of these!! What is the cost of the dowel legs ???

  • Swinnen Lisette Swinnen Lisette on Jun 05, 2016
    Doesn't it wiggle too much?

  • Senior Chief Senior Chief on Feb 13, 2017
    To equally space the legs you need to divide the circumference buy 3, not the diameter; or did I miss something?

Comments
Join the conversation
2 of 36 comments
  • Debby Dale Debby Dale on Jul 14, 2017
    I love this idea. You could also use a 2x2 furring strip for the legs and they are less than $2each for an 8 foot strip. Great idea especially for the college dorm or small apartment.

    Good job. And being in real estate for 35 years, I have seen more than a few folks use empty paint buckets for step ladders, so they are more sturdy than you think. This idea would also work using theabout 5 bottoms and the full eight foot furring strips attached the outside of the bottoms about 12 inches apart to make a "pantry" in a small kitchen. So many possibilities...Thanks for the idea.

  • Jenny Jenny on Aug 30, 2020

    Great idea, and being three legged they will stand securely on any surface. So out in the garden too.

Next