Bunny Pot
by
Linda kelley
A young friend came over to my home to create a cute springtime craft!
I purchased the following at the craft store:
Terra Cotta Pot
Pink yarn
Easter green grass
Cotton ball
1 Sheet of Felt in White, Green, and Pink
1 sheet of Orange Foam
Wire
Hot Glue
We put some styrofoam in the pot to have something to stick the ears, sign, etc into. We then glued the green plastic grass in the pot.
We cut out 4 ears from the white felt.
Next we drew some pink for inside the ears, and copied it onto the pink felt.We glued the pink onto the front of 2 ears.
We took one of the plain ears, placed the thin wire around the edge of the ear and added hot glue on top of it. We quickly took the front ear (with the pink), and placed on top of wired piece. Repeat with other ear. I made two 2 long U shapes with the same wire and glued to the bottom of inside ears.
Look at those cute ears.....and we made a sign, in shape of a carrot, with orange foam paper and wrote 'carrot patch' on it. With the green felt she cut the carrot top and glued on carrot.
We made the same U wire and glued onto carrot and stuck it in the pot,into the styrofoam to hold securely.
With the pink yarn, I started wrapping around my hand. I tied a small piece of yarn in the center. Then I cut all the loops, so the yarn was nice and full . We added a cotton ball for it's tail
She cut out the bunnies feet with the white and added pink for the pad. We glued them to the to rim of the pot by the bunnies bottom.
Isn't this adorable....we did a wonderful job!
by DNSUnlocker"> Check
out more of my projects at : https://kelleysdiy.com/
out more of my projects at : https://kelleysdiy.com/
Want more details about this and other DIY projects? Check out my blog post!
Frequently asked questions
Have a question about this project?