Creepy Halloween Goblet

7 Materials
1 Hour

I had this huge wine glass at home but it was way to heavy to hold when drinking wine. Instead of letting it go to waste I turned it into a Creepy Halloween Goblet. This can be used as Halloween decorations or it would look great as a centerpiece on the table at a Halloween dinner party. You can use this technique to decorate a goblet for any occasion you just chose moulds suitable to that occasion.

Paint the glass

Paint the glass black to start. I like to use gesso because it is a primer and it gives better coverage than acrylic paint. But either should work. Don't try and paint the surface perfectly smooth, the flaws will make the goblet look better later.

I used silicone moulds and hot glue to make all the embellishments to decorate the glass. You can use resin but the drying time is 12 -24 hours.

I put the glue in the mould then dipped my finger into water and smoothed over the surface. To speed up the drying time which is only a few minutes you can float the moulds in cold water.

Paint all the embellishments with the black gesso and glue them onto the glass.

If you can get your hands on some small cheap skeletons they would be a great addition to the glass.

To add a little more creepiness you can run some hot glue down the sides of the glass. This will look great once you add the gold wax paste.

Once you have decorated the goblet and painted everything black, you can use the gold wax paste to highlight the embellishments.

Rub a small amount of wax paste over all the raised surfaces first.

The image above shows how the flaws in the painting improve the overall effect.

To highlight more of the black you can use a small paintbrush and rub a very light coat of the gold wax paste over the surface. Try not to cover all the black so the effect is lost.

I bought some cheap silk roses for the budget store which I painted black using the gesso.

Once the gesso is dry, you can use some shimmer spray to make the flowers shimmer and stand out. It also looks great to add a touch of the gold wax to the edges of the flowers. The flowers were glued to the stem using a hot glue gun.

To make a platform for the skull to sit on, I cut some cardboard and glued it to the rim. The skull was then glued to the top of the cardboard. You could add some battery operated lights to the inside if you wanted to or just glue a candle to the skulls head.

And that is your creepy skull goblet finished.

More pictures and detailed instructions on this project available on my website listed below. Your cost on this project will depend on what materials you have at home. My cost is a guestimate for me.

More cool Halloween project ideas

This Halloween spellbook was made from a recycled book.

Halloween wine glasses

Complete your Halloween party decorations with these simple to make wine glasses.

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

Unique Creations By Anita
Want more details about this and other DIY projects? Check out my blog post!

Frequently asked questions

Have a question about this project?

  1 question


Join the conversation

3 of 13 comments