Thanksgiving Centerpiece DIY ~ Fall Crafts ~ Craft Klatch

7 Materials
$6
1 Hour
Easy
Looking for a beautiful and inexpensive centerpiece for Thanksgiving? With a little makeover of Dollar Tree pumpkins, you can make your Thanksgiving table extra festive!
Here is the video tutorial, so you can see exactly how I made them:
Start out with some dollar store pumpkins - they are the carvable kind.
Paint them using metallic colors. I used a copper, gold and green.
Using a stapler, I stapled four popsicle sticks together. You can glue them, but I was going for a rustic look and therefore liked the staples showing.
When they are together, paint them orange.
I cut out Happy Thanksgiving out of vinyl, with my Circut, but you can make it with any cutting machine. I stuck them onto the wood sign.



Tip: If you don't have a cutting machine, or when you are finished painting everything, then you can stencil on the words.
Once you apply the letters to the sign, paint over them with the same orange paint.
Once dry, paint over everything with the colors that were used on the pumpkin.
Once dry, remove the letters.
Glue a stick onto the back of the sign.
Insert the signs into the pumpkins.
Add fake fall leaves to the top of the pumpkins. I inserted the stems, but poked a hole first with a thin screwdriver.
Twirl wire around the handle of a paint brush, or pencil.
Add them into the pumpkins too!
See how to make the Grateful Sign here!


Thanks for stopping by! Be sure to check out the link to the full blogpost below! It has links to the products as well. ❤️


Happy Thanksgiving everyone!       


Mona
Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Mona  ~ Craft Klatch
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
Next