Engraved and Illuminated Plastic Ball Ornaments

I have a ton of these inexpensive shatterproof plastic ball ornaments and I wanted to dress them up a little bit.
I decided to get out my engraving tool (a Dremel) and see what would happen. The results were so pretty! I only took off the top layer of color and the white plastic would show through.
But what was even more beautiful was what happened when i added the balls to a strand of christmas tree lights.
The engraving would glow. It looked so cool. I created a video tutorial (embedded in the blog post) so you can see how I settled on a design and the type of engraving tips I used if you are interested in duplicating these!
Here is the full post: http://www.thekimsixfix.com/2014/09/engraved-and-illuminated-ornaments.html
Cheap plastic ball ornaments are what you start with. (Just make sure the plastic underneath is white)
For the full instructions on how i did it: http://www.thekimsixfix.com/2014/09/engraved-and-illuminated-ornaments.html

TheKimSixFix
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

3 of 10 questions
  • Lun3522627 Lun3522627 on Dec 27, 2015
    Beautiful! What Dremel did you use to create these?
  • Ann Maas Ann Maas on Dec 31, 2015
    Just beautiful! Thanks so much for sharing! QUESTION: How could I be sure that the ornament is white plastic underneath the coating? Thanks!
  • Kathleen Kathleen on Jan 05, 2016
    Beautiful, but what do all of we hopeless crafters who can't draw a straight line do?

Comments

Join the conversation

2 of 273 comments
Next