My Version of a Gardening Wreath
Today I am making a garden wreath. Truth be told I wanted to do a garden hose wreath but my hose would not hold its shape it was way too weak. So I used a grapevine wreath I had. I have seen these done in all different ways. Today I am showing you what worked best for me. Here are my supplies,
I bought three sets of clay pots at the dollar store. I used a grapevine wreath, decorative watering can and some flowers I had.
I tied each clay pot onto the wreath using my plastic coated wire I had. I tied going through from the small hole in the bottom and tying through a piece of the wreath. I tied then twisted the wire to hold the pot in place.
I just placed my clay pots sporadically around the wreath. I cut sprigs off from my flower bush in small bunches and cut enough to really fill up the pots so they would stay in them if the wind blew.
I tied my decorative watering can to the bottom of the wreath. I didn’t end up using the larger pots as I felt I had filled up the wreath nicely.
This is going to be hung outside on a vintage door I have leaning on the side of the house with my vintage bike. Bu the weather is not cooperating with me to be able to do that yet.
Comments
Join the conversation
-
Thank you so much for the instructions on how to put together the wreaths. I have seen these before and thought they were so cute😊 Your wreath turned out so nice and adds to your decor👍
-
I LOVE your version of this wreath. You gave very good instructions. I am going to try to make your version. Thank you for sharing. Oh LOVE your polka dot can. Too adorable.
Frequently asked questions
Have a question about this project?