DIY Wine Cork Pumpkin
A simple Wine Cork Pumpkin
Once you have gathered all the materials, take your Orange Paint and paint one end of the cork. I did two layers of paint, but you can get by with one. Do this for all but one cork – 24 should have painted ends.
Once the paint dries, warm up your hot glue gun, and sort similar corks into groups of 2 groups of 4, two groups of 5, and one group of 6.
Grab your ruler, place a bead of glue on the side of the cork, line up and glue to another cork – continue for the rest of the cork count combinations.
While the glue hardens, cut the 25th cork in half with your craft knife, and paint the 1/2 brown.
Once the glue has hardened, begin at the 4 cork row, place a bead of glue and place the 5 cork row, and then place the 6 cork row on top of that, then the 5 cork row and 4 cork row. Let harden.
Take the dried 1/2 brown stem and hot glue to top of corks.
Cut a 16 inch piece of twine
Cut two leaves, you can freehand this
Take one leaf, hot glue the end and place on the top of your pumpkin near the base of the stem, do the same on the opposite side for the 2nd leaf. Take Jute Twine, and wrap around brown stem, and glue on back to keep in place to resemble vine.
Resources for this project:See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Published November 7th, 2017 2:11 AM