I have cement walls what's best to use for hanging picture s?

Command strips

Hi Brenda, there are picture hanging kits that you can get at places like Home Depot specifically for cement walls. Usually, you have to drill holes though. If you don't want to drill holes, I would suggest as above and use some of the Comand Strip products.

There are several ways you can do this, it also depends on the weight of your picture, take a look here and see the suggestions:

https://www.hunker.com/13413633/how-to-hang-things-on-cement-walls

A concern with Command strips is if your walls are painted, the part that sticks to the wall may be a better bond with the paint than the paint to the wall, this will cause it to fail.

Best to you.

Command hooks if you don’t want to drill into the walls.

You can use masonry hangers, Command Hooks, or hardware hooks. Here's a link on all three:

https://www.wikihow.com/Hang-Things-on-a-Cement-Wall

You will need a concrete drill to drill a hole. They make plugs to insert in the hole so you can put a screw or hook. Local hardware store can help you out

Hi Brenda

Here is some info

https://www.hunker.com/13410864/how-to-hang-pictures-on-a-concrete-block-wall-without-using-a-drill

Hi Brenda, hope these help you out,

https://www.youtube.com/watch?v=XgkYiXppDug

https://availablemachinery.com/how-to-hang-a-picture-on-a-concrete-wall/

https://www.youtube.com/watch?v=UPKl5ohQIIU

This may help: https://www.wikihow.com/Hang-Things-on-a-Cement-Wall

Are the frames very heavy? Poster putty would work on light items. I've also used these command hooks that would work on cement as long as the surface is nice and flat: https://amzn.to/3mSTfP0

You can try the command strips if you have lightweight pictures or if you think you might want to move them often. I've never had great luck with them, they fall after awhile. If they are heavy or you want them to stay put for a long time, I'd use anchors, but I'd ask at the hardware store what's best for what you have to hang.

I think Command Strips should work. Just make sure to clean and dry the surface first.

Hello. One way would be to use a concrete masonry drill bit to place a screw. If you don’t want to make a hole in your wall another option Might be a command adhesive strip. The retail package are weight rated.

Hello Brenda,

Masonry nails or drill, plug and screw in to it.

There is cement screws you could use sheet rock screws will work to to hang pictures.

Command strips

Putting holes in concrete is pretty permanent so you can use Tapcon screws or if the pieces are light enough, Command Strips might work.