Up-cycling Bottles With a Bottle Cutter

6 Materials
$20
15 Minutes
Medium
The possibilities are endless when it comes to up-cycling bottles. I recently purchased a bottle cutter and now I have even ways to up-cycle those bottles!


I purchased my bottle cutter from Amazon.
You follow the instructions that come with the bottle cutter.  First it says to size the device to where you want the bottle cut.
Set the bottle inside the cutter and lightly press while rotating the bottle.  This leaves a score line on your bottle.  You don't have to press too hard and only go around one time.


After scoring, again following the instructions that came with - have 1 pot of boiling water and 1 pot of ice water. 
You'll hold the bottle in the boiling water so that the score line is under water for a few seconds...
Then immediately put the bottle in the ice water so that the score line is under water for a few seconds.  
Repeat this process until the bottle literally splits in half.
*Now to be honest - I went through a lot of bottles practicing this until I got the technique right (following the directions is key).  I would say most of the time it works great and sometimes the bottle doesn't cut cleanly.
Once the bottle is in half, use the sand paper provided to smooth the edges.

Now you're ready to create!  The possibilities are endless - glasses, candle holders, wind chimes, bird feeders...
Let's make a quick candle holder with the bottom -

Paint Mod Podge onto the bottle.
Roll in some Epsom Salt.
Let dry completely.
Add a battery operated LED light or preferred candle of your choice.
I would love to have you stop by my blog    Chas' Crazy Creations  for the full tutorial as well as sign up for my latest creations, posts, recipes, exclusives, and more...

I would love for you to subscribe to my YouTube channel to see more of my crazy creations - https://www.youtube.com/channel/UCIOsMN7hycVRco-MROXwmXg


Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

Chas' Crazy Creations
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

3 of 6 questions
  • Zelma Zelma on Jun 08, 2018

    How much does bottle cutter cost

    And can u use any bottles

  • Jacquienina Jacquienina on Feb 14, 2019

    I'm interested in 2 possibilities - 1 is to cut the bottle lengthwise. 2 is to cut a bottle at an angle. Does anyone have experience with either of these ideas?

  • Robyn Garner Robyn Garner on Oct 26, 2019

    Did you try tapping the score line with the ball that's on a standard glass cutter, prior to plunging into the boiling water? That's how you cut flat glass/mirrors and it might help get every bottle to cut properly.

Comments

Join the conversation

4 of 61 comments
Next