Wood Floor Lamp DIY ( BIG REVEAL)

I used common wood from home depot (2.5 width x 8 ft long) I believe it's $1.68 per board. For the base of the floor lamp I cut my edges at a 10 degree angle to make sure when I secured the legs they slanted inward.

Before putting together the base I lay it out evenly and used a ruler to mark a line across the center to make sure my dowels go in evenly.

Then I drilled holes as evenly as possible and inserted the dowels. Don't forget your gorilla glue.

Following that I attached my legs with screws and secured it at the top to a 2.5" x 2.5" block of wood. Don't forget to drill the hole for your lampshade wiring. That's it. Check out my video below.  

Here's a close up. In love with that rustic texture.

----------------------------------------------------------------

This is a MINI VERSION of the tutorial to see the full tutorial visit this link

----------------------------------------------------------------

PS. For those of you wondering where I got the leather lampshade. Visit the link below to see how I made it.

https://www.lilyardor.com/diy-lampshade-recover/

Here's the Video --

To SIGN UP for our newsletter click and 'Follow' along to be sure you don't miss a DIY!'

----------------------

You can view my recent DIYS here : https://www.lilyardor.com/diy/

----------------------

Thank you for Joining me today. I hope you liked this DIY

To SIGN UP for our newsletter click  this link and 'Follow' along to be sure you don't miss a DIY!'

----------------------

You can view my recent DIYS here : https://www.lilyardor.com/diy/

----------------------

Thank you for Joining me today.  I hope you liked this DIY

Here's the Big Reveal!! What do you guys think?