How to Paint a Washing Machine and Dryer

2 Materials
$10
1 Hour
Easy
Have you ever even thought about painting your washer and dryer? I hadn't, until I recently started work on a $100 room makeover in my laundry room. When I started to clean up I realized exactly how awful my dryer looked! Scroll down to my blog link to see the finished $100 room makeover. Here's my dryer BEFORE painting:
Here’s a close up of the scratches and wear along the edges of the dryer. That's from years of piling things on top of it. There are lots of scratches and spots that are starting to rust.  The washing machine didn’t look nearly as bad as this.
I wasn't sure exactly what type of paint to get so I ordered (affiliate links) appliance spray paint AND appliance touch up paint from Amazon. Both were under $5.00 when I ordered so they were well within my $100 budget. Plus it was so much easier than I thought it would be.Most of the time was in the prep work. I dusted and cleaned the tops with a regular household cleaning spray. Then I covered the surrounding area with an old sheet so my spray paint wouldn't get on the walls or floors.Then I just followed the instructions on the can: spray about 12"-16" away from the appliance with a back and forth motion. A second coat may be applied after 30 minutes.There were a few small scratches that I used the touch up paint on. You can barely see the spots. I pointed one out below. Look between the arrows:
And here's the finished dryer. This is after three coats of spray paint. Can you believe the transformation? It really does feel exactly like the original paint, too. I think the key is in getting it clean and using light coats of paint.
Don't forget to click through to the complete blog post for all the details AND to see my $100 laundry room reveal.
Suggested materials:
  • Appliance spray paint
  • Brush on appliance paint
Ann @ Duct Tape and Denim
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 7 questions
  • JoAnn JoAnn on Apr 15, 2017
    I have an older large upright freezer with rust bu the freezer door has a texture to it. The sides & top are metal. Could the same treatment be used on the textured door?

  • Sher Kilpatrick Sher Kilpatrick on Apr 15, 2017
    Can you use this same type of paint to paint a stove? Ours is a 40" with double oven in avacodo green. We can't find this size stove anywhere that isn't well over $2500. We want it white. Do you think if we put enough coats of paint this would work?

  • Joel Rose Joel Rose on Apr 19, 2017
    With do you do about a rusty spot that goes to the metal with scratches on a flat not edge surface, when you have to correct someone elses past mistakes?

Comments
Join the conversation
2 of 34 comments
  • Carol Harris Carol Harris on May 07, 2017
    I have a dryer that needs painting but our hot water heater and furnace is in my laundry room, I'm afraid the fumes from the paint would cause a fire, both hot water heater and furnace has a polite light. I love how pretty yours look.

  • Debra Wood Debra Wood on Mar 12, 2019

    My dryer looks like yours. I am going to do this. Great job.

Next