How to Make Ikea Ritva Curtains Look Like Expensive Custom Made Drapes
You don’t have to spend a fortune on custom drapes…I’ll show you how to make ready-made Ikea Ritva curtains look like expensive custom drapes.
I think beautifully designed and created drapes(window treatments) are second only to good lighting in a well designed space.
Step 1. Cut the Ritva to the proper length for your window.
Hang your curtain rod, including the rings. Measure from the bottom of the rings to the floor…this is the finished length of your drapes. Then add 8″ to this measurement and now you have the length at which you will cut your drape(cut length).
Step 2. Open the side seams with a seam ripper. Easy, but be careful not to rip into the face fabric.
Step 3. Press and sew in the double 4″ bottom hem.
Step 4. Cut lining to the proper size. The lining should be cut to the exact finished length and width of the drape.
Since these curtains are for my own house I used white sheets from the thrift store for my lining. It’s cheaper than buying lining fabric and it’s already hemmed.
When you position your lining to sew it under the side seams you’ll place the lining fabric 1.5″ to 2″ above the bottom of the curtain(pictured above). The bottom is NOT sewn together…the lining and the face fabric hang independently.
You only sew the lining to the face fabric on each side and at the top header.
Step 6. Create pleats.
I generally make my leading edge 3″ and my return 3″. Then figure out whats left to divide between my pleats and spaces. Your spaces should be between 4″-6″ and pleats should be between 4″ and 8″ typically. I actually made my pleats 3″ on this panel because it’s only double pinch pleat and I wanted more pleats. If you’re making a triple pinch pleat you’ll have go with a 6″ -8″ pleat, because you’ll obviously need more fabric to create a triple pinch pleat. There’s tons of tutorials on pleat spacing.
Step 7. Sew pleats. I move the binder clips closer to the edge of the pleat and sew the pleat behind the folds(only sew through two layers of fabric on all the folds).
Then sew the “pinch” at the bottom edge of the buckram.
Step 8. Insert drapery hooks
Your finished! You can now hang and style your drapes. You may need to train your drapes for a while by tying the drapery panels so they’ll stay pleated properly(like the pros do). I’ll make another tutorial on styling drapes so stay tuned.
This is a step by step tutorial on how to make Ikea Ritva curtains look like expensive custom made drapes.
Resources for this project:See all materials
Beth on Apr 10, 2020
Really worth doing, ladies! The last time I had pinch-pleated panels made for me, they were $125.00 per panel, per width! So a pair of lined draperies made of two widths of fabric in each panel (wide enough to actually close across a 48" window) cost me $500, not including the fabric. And I sew! I just didn't have anywhere with enough space to lay the length out, and I didn't want to fool with them. Expensive bit of laziness on my part!