I have an uneven stone fireplace and would like to install a tv?
What are some ideas to install it? the surface is so uneven
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
Can I use Faux Stone over painted brick fireplace?
Would it be best to fill grout grooves with mortar like a week before just to assure even surface and again they have been painted also. Frankly do not know if it fo... See more
How or what can I use to reattach stones to a fireplace surround?
my fireplace is real field stone and when it was constructed there were a few spots that needed more stone and Ihave no idea how to fix it simply
How can I update a pink and beige stone fireplace?
Can I replace the little gravel stones that came with gas fireplace?
The kit came with little tiny gravel stones. I would like to replace them with bigger more attractive stones. What is the purpose of these stones? just to look good?
I want to seal my stone fireplace
I have a field stone fireplace and the stones look dull. I would like to apply a sealer to keep it looking clean and wet looking. We occasionally use the fireplace. ... See more
You could pick up a special tv hanging bracket. Then you could attach that to the stone. The trick will be how to hide the cords?
You would need to even up the wall by adding a timber piece to cover the lower part or parts , then fix your brackets into the fire place wall through the timber. Best wishes
Assuming the frame of the TV is black, you'll need a flat board to lay on the stones to create an even surface. If you want it to match, then paint it black. Maybe you'll need some hardware too depending on how you want to attach it and where. https://amzn.to/2NNQHpm Do you have a picture so we can better visualize it?
I think the easiest solution is the swivel mount bracket that allows you to tilt, turn it 90 degrees or even pull the screw further out into the room. Amazon has a good choice where I have gotten ones for clients.. https://www.amazon.com/s?k=tv+mounting+brackets+for+flat+screens&ref=nb_sb_noss
or another solution would be to build a wooden cabinet to either frame the TV or have some doors to hide it... https://www.pinterest.com/pin/618541330047516586/ you could add a couple threaded bolts into the fireplace stone with a hammer drill and epoxy them in to mount the cabinet, then mount the TV inside by using the back of the TV mounting brackets.
Hi! We usually mount TVs on the type of mount where you can move it up, down and angle it. They aren't expensive, and make it much easier if you want it to be adjustable. Most fireplace mounts are too high for me to enjoy. Good luck!
add a shelf or wood mantle piece to sit the TV on or attach it to
here is info for you
Thanks so much for all the ideas, I may try and install a mantel.