DIY Backyard Swing
My husband really wanted a swing for us to use while the kids ran outside. So, I caved and told him to go for it! He’s a contractor, so he definitely has a lot of experience to whip up something like this in a day! He went to a local lawn care store and bought the actual swing. They can also be ordered online. They usually run around $200. Then he went to Lowes to get two 12 foot 6x6 posts and a 10 foot 2x12 boards (for the top part-to hang the swing on), chains to hang the swing, and a ton of 3 inch decking screws, and cement. He dug the holes to put the 6x6 posts with post hole diggers (he owns some through his business). He dug 32 inches in the ground and put the posts in and then added cement/water to make it more sturdy. Once he had the posts in, he added the top post (2x12’s-he cut the edges to give it a fancier look). He put blocks up there to hold the swing. He then screwed in metal hooks to hold the chains for the swing. Once he had all that done, he hung the swing. We absolutely love it and use it a lot when the kids are playing outside. Take a look!
My 5 year old wanted to help assemble the swing.
Here are the two 12 feet 6x6 posts up and as you can see the cement poured into the hole after he put the posts in
Now Jordan is adding the 12 foot 2x10 posts (he trimmed the sides to give it more dimension).
And my 3 year old wanted to get inside the 32 inch deep holes where the posts went.
He then added the block, and chains and added the swing.