How do I fix a broken metal hanging rod in my closet

Question

I have a broken shelf hanging rod in my closet I tried gluing And taping it and nothing worked I need help and also the shelf is slightly bent

William · Answer

The welds broke from the weights. Best would be to replace if budget allows. You can use zip ties just to repair it.

Mogie · Answer

These aren't expensive so when you get a chance just replace it but until then you need a quick solution.

I would not put a lot of weight on this until it has been replaced.

Dee · Answer

You need to use metal clamps.

Becky at Flipping the Flip · Answer

Once these are broken, they’re pretty well done for. Since you’ll have to replace it, if you can, try for something sturdier next.

Robyn Garner · Answer

Check Home Depot, etc. for 'standard sizes' of that piece. Use wire snips to cut away your damaged section in a width that you can purchase a 'standard size' replacement section. Install and voila!

If you have very heavy items you have to store, you can snip out the damaged area and use a wood shelf in its place. Get some angle iron for support and screw the shelf to the angle iron.

Johnavallance82 · Answer

Hi,

Looks as though you are holding too much weight on this system and although you could

fix it as a temp arrangement, it will not last long - see how the shelf is bending? Taki it down and fix a stronger arrangement for your needs. Good luck!

Adrienne Carrie Hubbard | Crafty Little Gnome · Answer

Based on the images, it would be best to just replace them and look for better and sturdier options.😊

Chloe Crabtree · Answer

You can buy a replacement piece of shelving at any home improvement store.

Redcatcec · Answer

Time to replace it, I would get sturdier supports and put them into the studs, for the top shelf I would put wood up there and hang the rack from that or a dowel system would also work with supports from the wood shelf.

Kathy Gunter Law · Answer

I had something similar happen in a closet and I used the heavy duty zip ties to hold in place.

Cheryl A · Answer

Lauren, you question has posted several times.

Vimarhonor · Answer

Hello. Some of the metal carabiners our weight rated might be something to consider. Several might be needed to help distribute the weight effectively efficiently. It will probably be best to replace it for long term reliability.