Easy DIY Window Cornice You Need to Make Now

8 Materials
2 Hours

If lighting is the jewelry of a home, then window treatments surely are the shoes! I mean, you need them! Learn how to make an easy DIY window cornice for your home in just an afternoon!

This post contains affiliate links. Please see my full disclosure policy for more details.

Ok, so you don’t actually need them, but your naked windows will thank you for it. I have a pretty hard and fast rule when it comes to windows, and it’s pretty simple. Do you wanna know what it is?

Dress them up! Seriously though, windows can be a focal point of any home, and a great accessory. So you should show them off. A well-dressed window can make or break a room design.

I do have 2 exceptions where I’m willing to break my own rule though.

  1. Black aluminum windows. All the heart eyes here guys, and on my wish list for a someday build.

Gahhhh. These babies should not be hidden! They are an architectural detail to be showcased. But for the rest of us who are just trying to love our boring builder grade vinyl windows, we need to dress them up!

2. Contemporary Modern Windows. These sleek stylish designs take a less is more approach. And in this case I would opt for a minimalist shade for light filtering only.

Ok, so I’ve told you why you need to dress them up, but I haven’t shared how.

A super easy and inexpensive way is to make your own custom window cornice. Now, I’m not reinventing the wheel here with this tutorial. But this is a very simple way to give your home a custom wow factor and flex your DIY skills in the process.

Full disclaimer…

This is NOT my first attempt at making a window cornice. I once tried this project a few years ago using Styrofoam.

What was supposed to be a quick and fun DIY project escalated into an hour long cleaning session. It was anything BUT fun. Every step in my kitchen left me with covered in tiny white particles that seemed to outsmart even the best DYSON vacuum.

Lucky for me though, I overcame my power tool phobia and whipped out quite a few cornices with my new method in this post.

Below is a list of tools and linked supplies that you can easily purchase for your project.

*If using power tools isn’t your gig, then no worries. As long as you have your measurements, the awesome guys at Lowes or Home Depot can make the cuts for you.

DIY Cornice Supplies

  • Miter Saw
  • Drill
  • Staple Gun
  • Wood screws (10)
  • Plywood or pine board
  • Fabric of your choice. I used this one here
  • Polyfill batting
  • D rings (2)

See, pretty simple so far right? Stay with me 😉

Step 1 – Measure for your window cornice

  • First, measure the width of your window, including any casing or trim work. You want the width of your cornice to extend at least two inches outside the farthest point on each side.

  • Next, take that length and add an additional 8.5 inches to it. This 8.5 inch section will get cut down into 4 sections your return pieces (sides of cornice) and brackets.

  • Finally, determine how tall you want your cornice to be. I opted for 12 inches on my smaller windows, but you can definitely make a statement on a larger window and go taller.

*Many pine boards already come in 12 inch heights and are a great option

for this project if you’re looking to reduce the amount of cuts you have to


Step 2 – Choose your fabric

This is where it gets fun! I recommend fabric shopping in person so that you can feel the weight of a fabric. You’ll want to choose a heavier upholstery fabric, so stay away from anything too thin.

This neutral striped fabric was perfect for our new playroom design.

You’ll thank me when you go to cover your cornice, because upholstery fabrics lay nicer and tend not to wrinkle during the assembly process.

Here are some home décor fabric ideas to get your inspiration flowing

Step 3 – Select your wood & make your cuts


For my project I used a simple plywood board like this one here. It’s a pretty large board so I had the guys at the Home Depot cut it down into strips for the height I needed. Since my windows are a pretty standard size, I chose to go 12 inches tall.

I ended up walking out of the store

with 3 long boards, which was more than enough to make quite a few cornices.

(Which I ended up doing…hey, when you’re

on a roll, right?)

If you have smaller windows though, you can probably get away with using a standard 12 inch tall pine board like this one here.

Make your cuts

Next, you’re going to make your cuts for the width of the cornice. Now, for those of you who are pumped up to use a miter saw, go get it girl. Just remember to add an additional 8.5 inches to cut your return pieces and bracket sections.

To recap, you’re going to take your long

wide board and make your first cut for the ideal width of your cornice and the

remaining 4 cuts as shown below for your returns (side pieces) and brackets.

If you don’t have a saw, or you’re hesitant to use power tools, no worries. As long as you give the folks at Home Depot your measurements they usually have no problem making a few quick cuts for you. Just don’t go overboard and ask them to cut 20 pieces. They might not like you all that much.

Step 4 – Assemble your window cornice

Now you’re ready to put this bad

boy together. Gather your cornice board, 2 return pieces, screws and drill.

  • Drill 3 pilot holes down each side of the
  • cornice as shown below. This will make it easier to join your wood pieces
  • together without it splitting.
  • Line your return piece up to attach it to your cornice and begin screwing them together with your drill.
  • Repeat these steps for both sides and you should have the frame of your cornice looking something like mine here:

Step 5 – Cover it

Next, you’ll cut your fabric and batting to

size, leaving enough overlap to wrap and cover your cornice board around all

the edges. Layer your fabric face down on a flat surface with your batting on

top. Make sure all edges are pulled tightly so that the fabric isn’t wrinkled

underneath and begin wrapping.

I hate to tell you this, but if you’re not a fan of wrapping presents then you’ll need to muster up some patience for this step.

Wrapping the cornice is sort of an art, but it really isn’t all that hard. Just begin in the middle, wrap the top, secure with your staple gun and then repeat with the bottom section. Remember to keep the fabric pulled tightly to prevent any wrinkling.

The back will not look pretty, mine certainly didn’t here, but the front should be nice and secure!

Step 6 – Attach your brackets

Finally, you’re almost there!

Grab your two remaining wood pieces for the brackets and attach each one to the insides of the cornice returns. No need for any pilot holes on this step, and if it’s covering any fabric and batting it should still attach just fine.

Step 7 – Attach your D-rings & install your window cornice!

Lastly you’re ready to attach each of your D-rings to the tops of your brackets as shown below.

This will be your mounting hardware to hang the cornice on the wall. I love this option because it makes the cornice removable in case you decide to paint your walls or reupholster it later down the road.

See, that wasn’t so hard now was

it? I hope this post gives you the tools you need to tackle an easy DIY project

that will make a whole lot of impact and help you love the home you have!

This was such an easy project that added a custom touch to our playroom makeover.

Have you ever tried to make your own window cornices? I’d love to know what method you used so drop me a comment below and don’t forget to subscribe to my weekly newsletter to get all of y best DIY tips delivered straight to your inbox.

pin this project for later

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Martina at The Lived-in Look
Want more details about this and other DIY projects? Check out my blog post!
Frequently asked questions
Have a question about this project?
3 of 5 questions
  • El El on Mar 16, 2021

    The d ring attaches to the bracket. What do you use on the wall to give the d-ring something to hang from

  • Sherry Sherry on Mar 19, 2021

    These really are lovely and your tutorial is, too. I am nosey: have you installed any blinds, sheers, or drapes for a little privacy or do you have no need for it?

  • Carmela Carmela on Aug 03, 2022

    You wrote: attach each of your D-rings to the tops of your brackets as shown below.

    In the picture, they don't look like they're at the top. Do you have a better picture?

    Also, where are the screws? In the wood trim around the window or on the wall?

Join the conversation
2 of 34 comments
  • Katen Katen on Mar 09, 2024

    Everything that’s old is new again! I recall in 90’s cornice boards were made out of everything from cardboard, Styrofoam, foam ore board and wood (you could buy kits using these mediums ready to cover). Fun easy to do. You could create the look with two curtain rods and a valance. Glad to see the comeback

  • Mar66401112 Mar66401112 on Mar 09, 2024

    Wish you would have included actual before and after pictures... Same view. I'm sure it looks very nice but is completely unpractical if privacy and/or sun blocking is needed. Very creative.