Criss Cross Ribbon Draped Christmas Tree

Bharati S
by Bharati S
1 Material
$10
30 Minutes
Easy
Did u set up the tree yet? If you are looking for an idea to decorate the tree with the ribbon, here is one. Here is tutorial for criss cross ribbon wrapped tree.
- Measure your tree and the length of the ribbon should be 1.5 times the length of the tree.
- Take 8 such ribbon pieces and tie the edges with a safety pin.
- Spread them around the tree in 8 directions
- Start tieing two ribbons together with a string, for the first row you will have 4 joins.
- For the next round, take one each from the joined ribbons and tie them. It should look some thing like this
- Take it all the way till the end of the tree. If you are left with ribbon, you can cut it or, tie a bow at the end
- I went over these joints with glass ornaments
- Deck up the tree with your favorite ornaments.
Suggested materials:
  • Ribbon   (Dollar store)
Bharati S
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
 2 comments
  • Joanie Joanie on Dec 22, 2017
    Wow!! This is different......VERY pretty.......Merry Christmas!!

  • Flipturn Flipturn on Dec 21, 2021

    For best results in achieving a professional look, use thicker heavier ribbon with a stiff wire edging, as opposed to the thinner ribbon that has more of a plastic feel.🎄


Next