DIY Rope Towel Holder
by
Lori Greco
(IC: blogger)
$6
1 Hour
Easy
Make a nautical-style towel holder using rope and some industrial plumbing clips. So simple and unique!
I’m here to share how you can make a towel holder with rope – a DIY project I did as part of my kids’ bathroom redesign. The bathroom has a nautical/rustic feel to it and I love how this towel holder works so well in this space.
Here are the materials you’ll need:
Ideally, you want to buy your rope to be the exact length of your towel holder so you don’t have to cut it yourself and seal the ends. Home supply stores will cut and burn the ends so it won’t fray but sometimes the edges turn black when they do this. So if you do need to cut your rope, you can do the following to prevent the edges from fraying: First, when you’ve figured out how long you want your towel holder to be, use a hair elastic and wrap it around the rope just above where you will be cutting it. Use sharp scissors or a utility knife to cut the rope and then hot glue to seal it. Clear nail polish would work too you just need a lot of it.
Next, tie a knot at each ends of the rope. I just did a single standard knot and this worked great. Don’t leave too much extra rope hanging.
Figure where you want your towel holder to be positioned on the wall and attach one of the galvanized clips where the right side of the holder will be. Make sure one end of the rope with the knot is through the clip. I used screws with wall anchors so I needed my drill, screwdriver, measuring tape and hammer.
Attach the other galvanized clip with the left side of the rope/knot to the wall where the other side of the towel holder will be. Be sure that both clips are even.
Hang your towel and admire your custom-made rope towel holder with a nautical/industrial feel!
I can’t wait to show you the rest of this bathroom transformation. I think you can see a hint of it in this picture. It’s been a slow process but it’s almost done. Enjoy!
Enjoyed the project?
Want more details about this and other DIY projects? Check out my blog post!
Published January 17th, 2016 12:25 PM
Comments
Join the conversation
2 of 40 comments
Frequently asked questions
Have a question about this project?