DIY \\ Jewelry Stand
by
Hassan Abu-Izmero
(IC: vlogger)
1 Material
$5
1 Hour
Easy
Hi Everyone! My name is Hasan, and I want to share with you how I made this jewelry stand. I'm really proud of it, so hope you enjoy.
Step 1: I began by taking a rusty piece of scrap metal that has the look of an old rake. Then I placed it in a clamp to hold it in place
Step 2: Using a metal rod I then bent the metal stakes to straighten them all. Make sure the clamp is on tight because lots of pressure is needed to get them in the right place!
Step 3: A sander was then used to shave off the rust and give the scrap a beautiful new metallic look!
Step 4: Using my wrench I removed two of the spokes, keeping them attached to one another.
Step 5: Out comes the pipe again to reshape the two pieces of metal that are fastened in to the clamp.
Step 6: Then heat the metal using a blowtorch to be able to weld the metal in to the perfect shape.
Step 7: Repeat the process for the second part of the original metal scrap. After it is prepared we are ready to weld the two pieces together!
Step 8: Time for the paint job... ;-)
Finished! Hope you enjoyed the way it came out! Hang you favorite pieces of jewelry and enjoy the unique design :)
Click the link below to watch the build video on YouTube!
https://www.youtube.com/watch?v=ezRb4sZ_GBI
Greets, HABU.
Enjoyed the project?
Suggested materials:
- Clamp, scrap metal, sander, pliers, blow torch (Scrapyard, hardware store)
Published August 29th, 2017 3:19 PM
Comments
Join the conversation
2 of 42 comments
Frequently asked questions
Have a question about this project?
Love it! Is it too heavy to hang on a wall?