Make a Coffee Pour Over Stand

Stephen Scott Johnson
by Stephen Scott Johnson
4 Materials
$25
1 Day
Medium
Make your coffee in style with this handmade coffee pour over stand. This will look great in anybody's kitchen, and it's a great gift for the coffee lover in your life.
You can go to my website for the project plan and layout. See the link at the end of this post. Basically, it's made of 2 triangles with 7 inch sides. These 2 boards will be joined by 3 wooden 3/4 inch dowels. You'll need a 2 inch and 3/4 inch Forstner bit for the holes. And you'll need wood glue. I used Mesquite wood (had it on hand) and 3/4 inch red oak dowels from Home Depot. Use woods of your choosing.
I used a miter saw to cut out the triangles, but use can use about any saw you have available -- jigsaw, table saw, hand saw, band saw, etc. Try to make the 2 pieces as identical as possible.
Use the 2 inch Forstner bit and drill one hole in the center of just one triangle. This will be the top of the coffee pour over and it holds the glass funnel. Drill the 3 -- 3/4 inch holes, preferably with the 2 triangles clamped or taped together so holes line up. And preferably use a drill press. Read your owner's manual and change the RPM of the drill to match the Forstner bits. Clamp down the workpiece as you drill.
Use whatever sanders you have on hand to sand the triangles. Sand both sides and the edges. I used a disc sander and an orbital sander. Start with 120 grit and go to 220 grit.
Glue the red oak dowels in place. I cut my dowels to a length of 7.5 inches, but you can adjust this to the size coffee mugs you use. Wipe off excess glue and all it to dry overnight.
You can do some more sanding if you wish, after the dowels have dried. This will make sure you've sanded off any glue stains. You can go up to a finer grit -- say 400 or 600 -- if you have it.
Apply a finish of your choice. I used my homemade beeswax butter mix. I applied one layer, allowed it to set in, and then applied a 2nd coat. You could also use a polyurethane finish or maybe a danish oil finish.
Here is the finished coffee pour over stand with a fresh cup of my favorite coffee. You can take these on camping trips or just use it in your kitchen. Check out the link below to see my expanded tutorial on how to make the coffee pour over stand. I also share where to order the glass funnel, but you can readily find these in department stores. Thanks for reading!
I also wanted to make you aware of my Home Shop Safety & Tool Checklist. This checklist comes in valuable if you are starting a new shop or reevaluating an existing one. You can get a FREE copy by subscribing to my FREE monthly newsletter. Go to the website and look for the sign up box on the left hand side. Thanks and happy woodworking!
Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Stephen Scott Johnson
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
Next