How to Build a Small Bookcase
by
ThisOldHouse
(IC: professional)
Assemble a custom storage piece with plywood and moldings. See shopping list and tools list here> http://tinyurl.com/ncd6fys
It's a shame to closet your collectibles when open shelving puts those prized possessions on proud display. And it doesn't take much to build yourself a custom bookcase: A few sheets of veneer plywood and some inexpensive molding, and you're well on your way to creating a proper showcase for your hardback favorites and treasured curios. Or you can find one that suits your space in a range of styles and materials, from unadorned models made of engineered wood to hardwood beauties with adjustable shelving and fancy molding. Either way, consider an attention-grabbing color to ramp up the statement.
1. ¾ inch plywood top: 1 at 13 by 33 inches
_cut the pieces. Using a circular saw and a straightedge, cut the assembly pieces based on the cut list in the last step. Sand them lightly. MORE> http://tinyurl.com/pv92k83
_build the sides. With the sides laid flat, position the shelf supports and use a strip of scrap to block out a gap for the shelves. Glue and nail the supports to the sides.
_assemble. Fit the shelves into the side slots, using clamps to hold it all together. Use the back panel to square up the assembly, then glue and screw it to the sides' edges. Tip the cabinet upright, apply glue to its top edges, and set the top piece flush with the back and sides but overhanging the front. Screw the top in place. MORE> http://tinyurl.com/o8d3hkd
_trim it out. Miter the base trim. Attach the pieces to the front and sides, flush with the floor. Install vertical lengths of fluted casing to the front edges, between the base trim and the overhanging top. Install a 1x3 crosspiece between the casings, up against the top. Miter and attach the chair-rail molding to the front and sides, flush with the top. Fill the fastener holes with wood glue, then sand and paint the entire piece. MORE> http://tinyurl.com/nouavjp
Enjoyed the project?
Published May 4th, 2014 11:36 AM
Comments
Join the conversation
2 of 4 comments
Frequently asked questions
Have a question about this project?