Framed Bathroom Mirror
![Homeroad](https://cdn-fastly.hometalk.com/media/profile/2019/08/23/37761_4.jpg?size=91x91)
by
Homeroad
(IC: blogger)
4 Materials
$40
2 Hours
Easy
I've needed to frame my bathroom mirror forever! It ended up to be easier than I thought and I can show you how!
Step one was to measure the mirror. I cut my trim moulding to size then mitered the corners using a chop saw at 45 degrees.
I fit the corners together with wood glue and L brackets on the back. When the glue was dry I used wood putty to fill the crack.
The frame was now ready to attach to the mirror. I used construction adhesive and clamps (including some very creative ones you can check out in my original post at Homeroad.net) to hold the frame to the mirror for 24 hours.
When the glue was dry I painted the frame with the same paint as the wainscoting. You can paint the frame before or after you hang it. I chose to paint it after it was on the wall in case any of the tape or clamps damaged the paint.
The project was super simple and I wish I hadn't waited so long to do it. To see the rest of this bathroom renovation please click HERE.
❤️ You can read all the details and see the rest of the bathroom makeover including a several other DIY projects by clicking the link below where it says GO. ❤️
Enjoyed the project?
Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
![Homeroad](https://cdn-fastly.hometalk.com/media/profile/2019/08/23/37761_4.jpg?size=91x91)
Want more details about this and other DIY projects? Check out my blog post!
Published April 27th, 2018 6:17 PM
Comments
Join the conversation
3 of 30 comments
-
-
Lauren of Mom Home Guide on Mar 19, 2021
Love the way your mirror turned out!
-
Frequently asked questions
Have a question about this project?
How would you remove the mirror in the event you need/want to replace it with the brackets covered by the new frame? It's hard to tell, but maybe your mirror is not held with slim metal brackets like mine is.
My large builder's grade mirror is flush to the wall and has 4 plastic raised brackets holding it on with screws. I don't know if it's glued to the wall. How to you use those clamps to get behind a mirror that's flush to the wall? Do I notch out spots on the back of the trim where the plastic brackets are holding the mirror up?
Just curious, what is with the basket and silver "lady"??? :o)