- cut at the size 10 pieces of poplar ply at 110x13 cm
- cut 2 pieces of birch plywood at 110x14 cm (ATTENTION birch ply is 1 centimeters much wide than the popolar ply pieces)
I designed a piece of laminated plywood wine rack hang on the wall.
It is 110x20x14 centimeters and it is made with 18 mm poplar plywood and 12 mm birch plywood.
I designed the bottle hole to fit in the standard wine bottle of 750 ml capacity.
It will take some time but it'll be worth it!
Sand down the internal part with drum sand paper bit mounted on power drill
I've realized this piece with simple power tools ,i've not used pro tools so i'm sure that you could replicate it with your personal spec as colours and sizing just putting patience and passion
PLEASE CHECK DOWN BELOW THE LINK ON MY INSTAGRAM PROFILE WHERE YOU COULD FINE OTHER PHOTOS OF THE FINAL PIECES HANG ON THE WALL AND ALSO SOME OTHER OF MY PROJECT AND MAYBE FOLLOW ME IF YOU'RE PLEASED TO ....THANKS TO EVERYBODY
VCRAFT CUSTOM CREATION
Main floor tiny bathroom reveal! This bathroom was the most difficult and annoying of the planning...
You know the vases I’m talking about, right?Those pretty vases you can find at places like Serena &...