This solid wood armoire’s 😍door came off during the move. It’s not staying screwed in so I need to find a way to repurpose this cute piece of furniture because I really don’t want to get rid of it. I’m NOT a carpenter😢so it preferably be something I can do that’s fairly simple. 😀Ideas??
It sounds like the screw holes got stripped when the door came off. You can use an epoxy in the holes, and take the hinges off the cabinet and let them set in the epoxy, then screw it back to the cabinet.
Agreed you can definitely fill those holes with wood putty or even glue, slip the door back on, tape it to keep it there until it dries and that should work fine. However if you remove the other door it may make a cute coffee station. It made me think of this repurpose: https://www.pinterest.com/pin/95631192061754499/
Hello. I like to use epoxy putty for my structural repairs. It is very strong and even can be drilled. I would suggest filling it with this inexpensive putty stick and remounting the door.
It's a two-part epoxy sticky-found at big box hardware stores in the plumbing department near the pvc purple glue. In a clear plastic red capped tube. I get mine at Lowes $6. Home Depots its version and JB Weld is another but more $ and smaller. Other smaller 2 part epoxy sticks options can also be found in the boat marine and wood repair shopping sections.
You mix -press -then you can use scrape off excess (I use depleted gift card) and/or sand and paint. Cured putty is strong enough to drill through.
I agree. The holes probably can be filled in with wood putty or sometimes, toothpicks in the holes will work. If you still want to repurpose it, here's a link with lots of ideas for you:
1. If we take an antique cabinet door with some loose hinge screws, the screws may include 3 different types.
They are original hinge screws, longer screws (used for the passage door previously) and a larger diameter screws.
We could easily choose the larger screw but it will cut new threads in the wood which is not recommended for the antique cabinet door.
So we are going to reuse original hinge screws which were connected with the antique cabinet door.
2. This time we will fill those screw holes with some form of convenient wood product and then start over drilling again using the same screws.
For filling screw holes you can have a lot of common options including brown toothpicks, stick matches, wooden golf tees or even chopsticks. You are recommended to use that wood product having diameter closer to the original screw.
3. You can use matchsticks with some glue on them. Push the glue with the matchstick to the hole, and trim the excess off flush.
4. Then you have to drill pilot holes and thread the old screws back in. A little paste wax also helps to make them easier to drive into place.
5. If you are wondering about how to fix a screw hole that is too big you can use a toothpick, sticking it in the hole and then drive the original screw further.
Plug the screw holes with wood scraps and wood glue and reattach the door in the old holes. The new wood and glue will allow you to use old screw holes. OR remove the 2nd door and add another shelf and stack bar glasses or books.
You can fill in the areas where it was screwed to with wood putty. Once it dries, it can be re attached with no issues.
Remove the other door and have the area open. You could add wallpaper or shelf liner to the interior. You could also stain a darker color for a nice contrast to the blue.
Others have given you some good ideas. I think you could also try changing out the hinges. You can find them in most home improvement stores. If you put them in a slightly different spot, you'll be able to use different wood that's not already damaged or stripped.
Wood putty won't work. it's made to fill holes, indentations, and smooth irregular surfaces. It won't support the weight of the door. It will just flake out. Use some pieces of wood and wood glue to fill the holes. Wood matchsticks, toothpicks, or golf tees. I like to use golf tees. Once the glue is dry I cut off the tee level. You can even "pencil sharpen" a piece of wood to fit the screw holes.
You don't really need the doors if you want to leave them off....I would just paint the inside of the piece, or add some fun wallpaper or contact paper to the inside and use it without. Store some pretty towels or blankets on the top shelf...or baskets, etc. It could be a showstopper!
Hi Nik! I would remove the other door and add some cute large bins or baskets! Fill baskets or bins with blankets! Paint the entire thing with chalk paint or mineral paint! :)
Hi Nik: If you pound some toothpicks or match sticks securely into the holes, then you can re=screw the hinge to the door and continue to use it. If you want, you could dip the sticks into glue before pounding and let dry over night before screwing. Put as many sticks as you can into the holes. If you don't want to do that, then you can remove the other door and use the doors as coffee tables. Put a piece of acrylic sheet over them. Good luck
It would be a fun piece to totally redo by using paint, wallpaper, or decoupage to add a lot of interest to it. Get rid of the doors completely for a totally new look, then use the doors in another diy-project. Double the FUN! :)
Hi All my DIY friends,I have a dated dresser that I would like to somehow fill in the handle holes on the drawers and add knobs to them. Does anyone have any ideas... See more
We had a professional in to paint our older oak cabinets. They were sanded, primed and painted 2 coats .I have a gas stove and the cabinets to the right of it are... See more
I am redoing a kitchen table/chairs and small buffet set but I'm not sure if I should use chalk paint or laytex paint. The table top, buffet top and chair seats will... See more
Former owners left a pair of rocking chairs on the porch. can I fix the gaps in the arms? I would love to salvage it or should I trash it? Suggestions would be... See more
I purchased a slipcover for my club chair in living room. The slipcover has too much material around the arm/back area. I am not a seamstress by any means. Do you... See more
Have these cute end tables on each side of my bed, I love them,, however surface area on top is too small. Thinking of adding some type of platform (maybe flat piece... See more
We have a concrete bench in the front yard that is a bit drab. Does anyone have suggestions on how to dress her up a bit? I was thinking white paint, but what kind?... See more
The arms of indoor patio chairs are peeling, bought the set at BJs a few years ago. Love the set but not liking the looks of the chairs. I think maybe they are... See more
My outdoor foot stool and matching small table are falling apart. I purchased the plastic wire, however, I cannot find instructions even on YouTube. All instructions... See more
HeyI would love some suggestion on how I can make this something for me to store some of my crafting supplies. This is a old plant stand that keeps being used to lay... See more
We bought a new bedroom set for our little granddaughter who has bad allergies but she can’t even sleep in her room due to the strong odors coming from the furniture.... See more
So the advise I got said "you do not need to sand the table and chairs or even prime before using Valspar chalk paint." "Use Minwax Polyurethane spray to finish."... See more
Your comment...
Nik: you may want to try some wood putty in the holes. Let it dry well and then try to screw back in. ...it's a cheap, easy solution
It sounds like the screw holes got stripped when the door came off. You can use an epoxy in the holes, and take the hinges off the cabinet and let them set in the epoxy, then screw it back to the cabinet.
Good idea!🤔. Thank you
Can you move the hinges to a part of the door that didn’t get damaged? Then you can use the door again! :)
I’m really not sure that I have enough space to do that without the door being crooked or offline.
Agreed you can definitely fill those holes with wood putty or even glue, slip the door back on, tape it to keep it there until it dries and that should work fine. However if you remove the other door it may make a cute coffee station. It made me think of this repurpose: https://www.pinterest.com/pin/95631192061754499/
Hello. I like to use epoxy putty for my structural repairs. It is very strong and even can be drilled. I would suggest filling it with this inexpensive putty stick and remounting the door.
It's a two-part epoxy sticky-found at big box hardware stores in the plumbing department near the pvc purple glue. In a clear plastic red capped tube. I get mine at Lowes $6. Home Depots its version and JB Weld is another but more $ and smaller. Other smaller 2 part epoxy sticks options can also be found in the boat marine and wood repair shopping sections.
You mix -press -then you can use scrape off excess (I use depleted gift card) and/or sand and paint. Cured putty is strong enough to drill through.
I agree. The holes probably can be filled in with wood putty or sometimes, toothpicks in the holes will work. If you still want to repurpose it, here's a link with lots of ideas for you:
https://www.pinterest.com/vrymeryvntgstyl/armoire-repurpose/
This is a section that applies to your problem, using products you may have on hand, without buying a wood filler, wood putty, or wood glue:
https://thesprucetools.com/how-to-fix-a-loose-screw-in-wood/
Filling the holes using same screws
1. If we take an antique cabinet door with some loose hinge screws, the screws may include 3 different types.
They are original hinge screws, longer screws (used for the passage door previously) and a larger diameter screws.
We could easily choose the larger screw but it will cut new threads in the wood which is not recommended for the antique cabinet door.
So we are going to reuse original hinge screws which were connected with the antique cabinet door.
2. This time we will fill those screw holes with some form of convenient wood product and then start over drilling again using the same screws.
For filling screw holes you can have a lot of common options including brown toothpicks, stick matches, wooden golf tees or even chopsticks. You are recommended to use that wood product having diameter closer to the original screw.
3. You can use matchsticks with some glue on them. Push the glue with the matchstick to the hole, and trim the excess off flush.
4. Then you have to drill pilot holes and thread the old screws back in. A little paste wax also helps to make them easier to drive into place.
5. If you are wondering about how to fix a screw hole that is too big you can use a toothpick, sticking it in the hole and then drive the original screw further.
Plug the screw holes with wood scraps and wood glue and reattach the door in the old holes. The new wood and glue will allow you to use old screw holes. OR remove the 2nd door and add another shelf and stack bar glasses or books.
You can fill in the areas where it was screwed to with wood putty. Once it dries, it can be re attached with no issues.
Remove the other door and have the area open. You could add wallpaper or shelf liner to the interior. You could also stain a darker color for a nice contrast to the blue.
Others have given you some good ideas. I think you could also try changing out the hinges. You can find them in most home improvement stores. If you put them in a slightly different spot, you'll be able to use different wood that's not already damaged or stripped.
What if you took off the other door and replaced them both with two new matching ones? You could try fastcabinetdoors.com for options
Wood putty won't work. it's made to fill holes, indentations, and smooth irregular surfaces. It won't support the weight of the door. It will just flake out. Use some pieces of wood and wood glue to fill the holes. Wood matchsticks, toothpicks, or golf tees. I like to use golf tees. Once the glue is dry I cut off the tee level. You can even "pencil sharpen" a piece of wood to fit the screw holes.
You don't really need the doors if you want to leave them off....I would just paint the inside of the piece, or add some fun wallpaper or contact paper to the inside and use it without. Store some pretty towels or blankets on the top shelf...or baskets, etc. It could be a showstopper!
Take off the other door. Paint the inside to match or a contrasting color!
Hi Nik! I would remove the other door and add some cute large bins or baskets! Fill baskets or bins with blankets! Paint the entire thing with chalk paint or mineral paint! :)
Hi Nik: If you pound some toothpicks or match sticks securely into the holes, then you can re=screw the hinge to the door and continue to use it. If you want, you could dip the sticks into glue before pounding and let dry over night before screwing. Put as many sticks as you can into the holes. If you don't want to do that, then you can remove the other door and use the doors as coffee tables. Put a piece of acrylic sheet over them. Good luck
It would be a fun piece to totally redo by using paint, wallpaper, or decoupage to add a lot of interest to it. Get rid of the doors completely for a totally new look, then use the doors in another diy-project. Double the FUN! :)
do you actually have that door or you have just one?
Just seeing this. I have the door in the garage.