How did you get black Polycrylic ?
In a video on your site , they applied black Polycrylic on the bathroom floor that’s was tile. How did you get black Polycrylic?
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
Where did you get the plantation Shutters for the patio door ?
i have tried to get a quote and been told by Hunter Douglas they can't be installed because I need a 3-5" frame on three sides. I don't see this in the picture. I hav... See more
How do I open this tube?
The end of this tube is very hard. I slightly tried to punch the end of a knife into it and also tried a large paper clip but neither budged it. I was a bit timid in ... See more
Do all sewing machines have a presser foot tension regulator?
I am a mid to intermediate level seamstress. I've had two machines over the past 40 years, a Kenmore, followed by a White sewing machine, both very nice sewing machi... See more
How can I stiffen crepe paper?
HelloIs there anyway I can stiffen crepe paper leaves?
You need to go to the original post to ask a question or comment.
I'm pretty sure they added paint to tint it.
Was this the one you were thinking of? https://www.hometalk.com/diy/paint/everything-you-need-to-stencil-your-tile-floors-for-less-40670621
You can ask your question over there or look at the resources list.
Everything You Need to Stencil Your Tile Floors For Less
General FInishes makes a black water based poly acrylic.
https://generalfinishes.com/wood-finishes-professional/water-based-paints-glazes-and-pigmented-top-coats/enduro-pigmented-black
You can just use acrylic paint and add the clear coat at end. You'll want to coat the entire floor at the end anyway.
They mixed paint in with the polycryclic.
paint and then poly on top
You'll need to locate the original post to get the most accurate answer but they probably used black acrylic paint. Adding paint to a polycrylic creates a type of thin glaze.
Hi! You can also buy it. General Finishes makes a black topcoat. Stay safe!
The most difficult part is locating a water base or compatible stain to add to the polycrylic but you can also use paint and paint tints.
Here is some info for you
https://www.youtube.com/watch?v=kKeSQQ3zz4w
It is available at Lowes and HOme Depot according to what I found you can order it from your local store online and pick it up or they will bring to your car
Hi Michael, hope this post helps you out, I am still trying to locate the post you saw
https://www.youtube.com/watch?v=FkEz72VHbGo