What glue is best for gluing back together this Loom Box ?
Have tried to glue it already with UHU but it eventually all came undone again and my lovely separated beads ‘n’ things all congregated together in one big mass ! Have now painstakingly separated everything again and want to glue back together...but what glue will work ?.......also, the UHU was easy to pick off the small separators, as you’ll see in the attached photo but I couldn’t get it off the larger, longer ones. Any ideas how to remove it before I try a glue suggested please ?
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
How can I glue sisal rope to cardboard? What is the best glue to use?
I am trying to make decorative baskets using heavy cardboard boxes. I tried a spray glue, but it wasn't working.
What is the best glue for gluing rocks onto plastic
I have been trying to make fairy houses out of plastic flower pots for outside but can't seem to find glue that will work. I bought rocks from a craft store and trie... See more
What is the best glue/adhesive for adhering plastic to metal?
Need to glue a round plastic reflector to a metal mailbox. Gorilla Glue didn’t work.
What is the best hot glue gun? We own a flower shop and do silk
What is the best hot glue gun? We own a flower shop and do silk
I would suggest checking out the glue aisle and look at the gorilla glue options. They make these great little "tabs" that are permanent that I wonder if you could cut them to size to work for you.
Lindi: I am a real fan of Gorilla Super Glue Gel
Super glue should do the trick!
Gorilla Glue or E6000.
Righto
Clear epoxy glue, such as Gorilla Glue
Thanx
But does anyone know how to remove the remainder of the old UHU ?
Gorilla Glue or E6000 are both good choices. Both are available on line, at your local home improvement store like Menard's or Home Depot, and Wal Mart. Good luck Lindi. Hope all is well with you.
Would E 6000 work for your project?
https://www.amazon.com/E6000-237032-Craft-Adhesive-Clear/dp/B004BPHQWU
perhaps checking out reviews and Q&A will help you decide if it might be suitable for your needs.
I can't tell if this would work by your picture. ....Check out Harbor Freight. They have 80 watt plastic welding kits. You might need to just weld(melt) the plastic together where it cracked. Or you can just buy a new box. I don't know how much that plastic welder costs.
I like E6000 glue or super glue
I love Aleen's Fusion Glue: https://amzn.to/2A8LK48
Gorilla glue or Loctite Marine glue should work. But you can also try using wooden shims rather than plastic.
Thanks for all the replies guys, much appreciated, stay safe everyone
Those boxes don't need to be glued, there are little grooves where the dividers fit into them. However, if you want to make them permanent, you can add a drop of hot glue or E6000 in the grooves.
Crazy glue will hold that and put a little tape on the bottom to hold in place
Hi Lindi, I love using a web site called "This to That" - https://www.thistothat.com/ to figure out what the best glue is for projects. You just need to enter the two things you want to glue together and they'll tell what to use.