Stamp Your Way to a Beautiful Drop Cloth Rug

11 Materials
$10
20 Minutes
Easy

I love working with drop cloth. It’s an easy way to create unique pieces for your home without breaking the bank! In this project I’ll show you how I created a small rug out of drop cloth. I’ll also be showing you some useful techniques along the way, including no-sew hems, stamp layering, and stenciling. So what are you waiting for? Scroll down and check out my step-by-step tutorial to get started making your own drop cloth rug today!

This video file cannot be played.(Error Code: 102630)


Tools and Materials

Tools and Materials:

  • Drop cloth
  • Ruler
  • Pencil
  • Scissors
  • Hemming tape
  • Painter’s tape
  • Stamps
  • Ink
  • Ink pad
  • Paper
  • Stencil
  • Paint

Prepare, Measure, and Cut the Fabric

Mark the Drop Cloth

Whenever you work with any kind of fabric, it’s important to always wash the fabric before you work with it. Often it may shrink, and the last thing you want is all of your hard work going down the drain because it’s no longer the size it originally was. 

Measure

Using the hemmed edge as a guideline, I measured out 36 inches on one edge, and 24 inches on the other edge. I measured again on the other end and then marked where I was going to cut with a pencil. This provides nice, straight lines for you to cut along. 

Cut

With everything properly marked, I then cut along the lines. If you are going with the grain of the fabric you can rip it and it will rip nicely along the line, but I am going to be hemming it later so I chose to cut with my scissors instead.

Hem

Add Hemming Tape

I am certainly not a seamstress, so I decided to work with hemming tape instead of sewing my hems. It’s easy to work with this product. 

Iron

All you have to do is lay it out along the edge of the fabric and run over it with an iron. 

Remove Backing

Then you peel off the backing, fold the fabric over, and run over it once again with an iron. 

No-Sew Hem

I’m using the ultra-hold hemming tape because I’m working with canvas, which is heavier than other fabrics. Then I repeated this process along each edge.

Add a Border

Add a Border

I wanted to leave a blank border around the rug, so using my ruler I measure in 2 inches on each end of the rug. Then I added a strip of painter's tape just inside the marks, creating a clean frame for where I wanted to stamp.

Stamp

Stamp

I’m going to be working with a few stamps today. The first one provides a great crackled background to any stamp you layer on top of it. 

Add Ink

I loaded my stamp pad with fabric ink and pounced it all over the stamp.

Press the Stamp Down

Then I placed it just along the edge of the area I had taped off, with it overlapping a tiny bit, and pushed down. 

DIY Crackle Effect

I repeated this over the entire taped off area of my rug.

Layer the Stamps

Create a Mask

Next I created masks for my stamps. In order to create a mask I stamped pieces of printer paper with a flower and a leaf and then cut them out. This will allow me to layer stamps without adding color where I don’t want it.

Stamp the Flower

I loaded up my flower stamp with ink and then stamped it in place, pressing down firmly. I repeated this process on the opposite corner of the fabric.

Layer the Stamps

Next I loaded up my leaf stamp with ink. I took the mask I had created for the flower and lay it down over the stamped flower, trying to be as exact as possible. Then I stamped the leaf overlapping it, which gave the effect of the leaf coming out from behind the flower.

Layer More Stamps

I left the mask on the flower and added a few more stamps to the mix until I was happy with how it looked. Let your creativity be your guide as you layer stamps.

DIY Layered Stamps


Add a Stencil

Add a Stencil

I stuck a silkscreen stencil down firmly in the center of the rug. 

Add Paint

Using a light hand I scraped paint over the open areas of the stencil. Make sure to go in a few different directions to get full coverage, especially when working with fabric. Then I grabbed the edge of the stencil and pulled it up. Make sure to put it in water immediately to make it easier to clean it. I removed the painter’s tape and let it fully dry. Then I placed a piece of parchment paper over it and ironed it to make it washable.

Drop Cloth Rug

I’m in love with the finished product! Drop cloth is so cheap and versatile that you could make tons of these to give as gifts or use all over your home. How would you personalize your drop cloth rug? Let me know in the comments below!

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info

Have a question about this project?

Join the conversation

4 of 19 comments
  • Sherry
    on Jul 17, 2020

    Gorgeous result!

  • Jill Marie
    on Jul 21, 2020

    I love this! Imagine Long, flowy patio curtains done the same way. Has the paint colour held up in the wash? I’d think cold water, gentle cycle, and a light ironing would be ok.

    • The Weathered Shed
      7 days ago

      Thanks Jill. These are decor inks that are permanent. They are meant for fabric and washing. Of course they may fade a bit over time, but they are beautiful inks and I love the look.

Your comment...