DIY Wind Chimes That Will Bring Music to Your Garden

15 Materials
$7
4 Hours
Medium

I love the sound of wind chimes but wow they're rather expensive to purchase so I said to my husband let's try to make some. Maybe it'll be so easy we'll make a whole yard full, lol!

A precise but totally do-able project!

I had no clue it wasn't as simple as cutting some metal tubes and stringing them to wood circles lol.


Interestingly you CAN purchase individual wind chime components- the chime pipes and the wood pieces- and put together a wind chime with no tools needed. I love options, don't you!?!


But here is how we did it....

Gather your supplies & cut your pipes

We purchased a 5 foot long piece of 3/4" conduit pipe in the electrical section of the store. We cut it with a conduit pipe cutter but a hacksaw would probably work also.


To get chimes that sound good together you can search the internet to find a variety of tone and required lengths. This is what we went with along with the precise lengths they are cut:

C sharp 14-3/16"

D sharp 13-3/8"

F sharp 12-1/4"

G sharp 11-9/16"

A sharp 10-15/16"


Once cut use a deburring tool on the ends to remove sharp edges and lightly sand off any wording your pipe may have on it.

Drill your hanging holes

Next drill the holes to hang them and again they need to be precisely placed. File any sharp edges.

C sharp 3-3/16"

D sharp 3"

F sharp 2-3/4"

G sharp 2-9/16"

A sharp 2-7/16"

Prep your 3 pieces of wood

You'll need 3 pieces of wood which you can purchase at the hobby store or go cheap and cut from scraps of wood you already have.


The shapes and measurements we went with are as follows:

chime support: 7" round and we drilled a center hole

clanger: 3-1/2" round

wind catcher: we went with a butterfly shape but anything that will catch the wind is fine


Stain or paint your wood which will help seal it from the elements. I spray mine with clear spray paint also.

Attach eye hooks

Screw in an eye hook in the center of the clanger both top and bottom and another in the center of the butterfly as shown.

More eye hooks...

On what will be the underneath side of the chime holder you'll need an eye hook for each of the 5 chimes. Space them precisely and evenly apart.

Reinforcing your twine

Using short pieces of shrink tube you'll be sliding them onto nylon twine. If you center them through the tube when the wind moves the chimes it won't cut into the twine. Use a flame to melt the tip of the twine then it slid right through the tubing.

String 'em up!

To better understand how to thread the chimes look at this drawing which shows the 5 chime pipes and the 5 eye hooks.


Each piece of twine goes through a chime with one end tied onto the eye hook to it's left and the other end to the eye hook to it's right.

Lots of stringing!

Here you can see tubing covered twine in place in each chime.


For balance you'll place the longest chime, then across from it place the shortest chime. Then continue likewise so that you can keep some balance. About 3" space between each chime and the chime holder above is good.


For your clanger you'll want it strung in the center so it hangs midway down in the center of the chimes. Then string the wind catcher underneath the chimes so it can catch the wind and moves the clanger to ring the chimes.


Cut the excess strings and put a dab of glue from a glue gun onto each knot near the eye hook for extra security.

And they sound lovely!

This video file cannot be played.(Error Code: 102630)

We're pretty happy with it and may just make a few more.  I think a a really big one would be awesome!


We had some of the materials already and all the tools needed but I'd say most people should be able to make one "from scratch" using about $7 worth of materials.

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info

Top Hometalk Projects

17 Benches You Can Build This Summer
15 Fun Things You Can Make Using Your Cricut
21 Clever Wind Chimes You Can Make
Check Out These Wonderful Ways To Decorate Your Plain Mugs
30 Of The Best DIY Mirror Projects Ever Made
3 Easy Ways To Upgrade Your Pillows To A High End Look
15 Clever Ways To Repurpose Old Light Bulbs
30 Creative Ways To Repurpose Baking Pans
15 Unique Father's Day Crafts
22 Ideas To Make Your Terracotta Pots Look Oh-So-Pretty
3 Easy Ways to Make The Cutest Coasters for Your House
16 Fun Ways You Can Use Food To Decorate Your Home
30 Genius Ways To Make The Most Of Your Closet Space
15 Cute Ways To Decorate Tin Cans Into Planters
15 Memorial Day Crafts

Have a question about this project?

Join the conversation

2 of 6 comments
  • Dl.5660408
    on Sep 7, 2020

    Awesome! And thank you so much for including how to cut the pipe for such a lovely song♥️

  • BeeZee
    on Sep 22, 2020

    love this project, well done!

Your comment...