Suspension Lamp With Flowers
It doesn’t always have to be extensive renovation work to beautify your own four walls. Even small handicrafts can have a big effect.
We’ll show you how you can spruce up a simple hanging lamp made of paper with a little paper and creativity – this is how you can conjure up individual eye-catchers for your home.
- Suspension lamp made of paper
- Cable with socket
- solid tracing paper
- Papers with small flower motifs, punch pliers, scissors
- Motif punch with large flower (approx. 4 cm)
- Ribbon 2 mm x 18 cm per flower
- glue stick
- Fabric tape 19 mm red
- Double band
Glue the fabric tape lengthways onto the cable. Press firmly until the seam closes. If it is too thick, repeat the process from the other side so that the open seam is covered.
Then punch flowers out of the flower paper and the tracing paper with the motif punch and glue them together: Each flower consists of 3 petals, 2 x transparent and 1 x patterned.
Now use the punch pliers to punch through the individual blossoms twice each with a little space between them.
Then you pull the color-matching ribbon like a loop through the holes, tighten the loop and fix the finished flowers to the lamp with a double ribbon.
Finished!
Enjoyed the project?
Suggested materials:
- Suspension lamp made of paper
- Cable with socket
- Solid tracing paper
- Papers with small flower motifs, punch pliers, scissors
- Motif punch with large flower (approx. 4 cm)
- Ribbon 2 mm x 18 cm per flower
- Fabric tape 19 mm red
- Double band
Frequently asked questions
Have a question about this project?
I’m sorry but I’m a bit confused with your first directions. I went to you blog but I didn’t find it much clearer. Why do we put fabric tape on what I think is the light’s cord? How did you secure the light inside the lamp shade, did it come with the lantern? I love how pretty this turned out and want to be able to replicate it. Thanks in advance for your help and for sharing this beautiful project!