DIY Pallet Range Hood
![Ahna Fulmer](https://cdn-fastly.hometalk.com/media/profile/2021/04/06/49218586_1.jpg?size=91x91)
Learn how to add farmhouse style charm in your kitchen with this easy DIY pallet range hood tutorial!
DIY Pallet Range Hood
Here is the range hood before.
This is a standard 30″ hood, and if any of you have a similar style then my measurements probably apply to you too!
If not, then just apply these concepts and apply accordingly to your range hood!
For more kitchen DIYS be sure to check out:
DIY Pallet Range Hood
OUT THE PALLET WOOD TO ENSURE SIMILAR THICKNESS.Line up your pallets to find like widths and thicknesses and stack them together.
In this case the width doesn’t matter because you will need to cut them to custom widths anyway, but you DO want to make sure the thickness is the same!
Here is my favorite tool! My Ryobi Brad Nailer!
I might sleep with this cutie at night if I didn’t risk driving a nail through my arm.
It is fabulous.
DIY Pallet Range Hood
THE WIDTH OF THE PALLET BOARDS TO 3 3/16″.The width of the boards were all cut to 3 3/16″. This gave me two rows on 3 sides .
DIY Pallet Range Hood
THE CORNERS AND LAY OUT THE ROWS.I mitered the corners and laid out my two rows. Notice my work table is our trash can.
DIY Pallet Range Hood
SAND THE EXPOSED SIDE.Also look at that pretty detailing! Make sure you think through which side has the best appearance and Sand lightly before adhering to the range hood!
DIY Pallet Range Hood
THE PALLET BOARDS TO THE RANGE HOOD.First apply the liquid nails, then get out your handy, dandy brad nailer!
Use a hammer to tap the boards tightly in place.
Voila!!
DIY Pallet Range Hood
Before
DIY Pallet Range Hood
After
For more kitchen DIYS be sure to check out:
Pin any of the images below for later!
Enjoyed the project?
Resources for this project:
See all materials![Ahna Fulmer](https://cdn-fastly.hometalk.com/media/profile/2021/04/06/49218586_1.jpg?size=91x91)
Comments
Join the conversation
-
Jeannette, FL on Nov 25, 2021
Very nice. I’m doing some planning for a future home. This will help. By the way, I have the same work surface as you do, lol.
-
-
Patti Carver Harris on Feb 21, 2022
What a great look! Also love your backsplash, pan rack and that fabulous range! It’s really pretty!
-
-
Frequently asked questions
Have a question about this project?
So you added to an existing hood? Wish I could have done that but we had the basic builder small cab with microwave that vented back into the room which drove me nuts! So we took out the duo and relocated to another area. My husband built the new hood and was trimmed out with beadboard and also wood I stained then added copper nails for more wow factor!
Do you find it a problem to clean ? My old vent hood used to get so dusty/greasy but it was painted metal and cleaned easily with degreaser, but that wouldn’t work on raw wood, right?