Slanted Closet Ceiling Solved!

6 Materials
I used Modular Closets to design a pallet wall walk in closet with slanted ceilings
My latest DIY project tackles two things I'm passionate about: pallet walls & slanted ceilings. Since our office is a converted house, my CEO's office (read: master bedroom) has a nice empty walk-in closet = perfect project location. After removing the old wire shelving and window moldings, I marked off my studs to assure the securest possible anchor.
The Before Pic
As chance would have it, I secured myself a bunch of free pallets- Here they are in my backyard.
I started by using a Sawzill, or reciprocating saw, to saw into the nails holding the cross boards to the main frame. Took a while to find the right blade, and I ended up switching over to a standard handsaw. This allowed me to saw the boards along the edge of the frame. The pieces ended up being smaller, but I found this method to be the easiest of all.
After sanding down my pallet boards & setting up my 2.5" Nail Compressor, I began nailing the boards onto my closet wall at staggered intervals. I left a space where I knew the center Drawer Unit I'd planned to go under the window would be, figuring the drawer fronts would block the back wall.
After finishing the lower half, it was time to tackle the slanted angles of the roof. Proud of this: I used a board held to the angle of the slant to mark my trim line on the pallet board that would be cut to fit the angle. Nice DIY tactic, if I do say so myself ::)
Oddly satisfying, fitting in the last few angular pieces:)
The finished wall, before closet install
I planned out my Modular Closet to stand at 78" from the floor at the highest tower, calculating a 6" filler base I'd create using our matching filler strips. The base came out approximately 16" from the base to account for the 14" depth of the Modular Closet components & around 2" of pallet wall. I opted to just keep the Shelf Towers without adding closet Drawers to them. Mounting the Shelf Towers (without their included floor supports) & smaller Shelf Unit left me some space in between to construct my own hanging area from a Rod & Shelf. I wanted the staggered descending heights of the units to flow with the roof's slant.
Next morning, I went to Lowes & bought some discount cacti & a planter under the window. Fashioning a box from some leftover pallet boards was a cinch.
Finished! Still need to put the remaining Drawer pulls & finish around the windows...

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

Frequently asked questions

Have a question about this project?

3 of 4 questions
  • Diana Diana on Dec 10, 2016
    It looks like there are lights on the tops of the cabinets. Are there, and if so what kind?

  • Tammie B Tammie B on Jul 07, 2018

    Where do you find to be the best places to get free pallets?

  • Mainiebets Mainiebets on Dec 30, 2018

    I just LOVE this! Beautiful job!! I am terrible with angle cuts. Would you mind explaining the “board held at angle” method in detail for me? Thanks so much!

Comments

Join the conversation

2 of 85 comments
  • Toni Teague Toni Teague on Jul 10, 2019

    I love this idea. I am a succulent lover so you really got my attention on the window box. You are so lucky to have a closet area with a window. It makes picking out clothes so much easier. Sometimes the blues and black can be hard to tell apart especially in a dark room. Your sharing of the angle trick will be appreciated by many. Thank you for sharing.


  • Jamala W Jamala W on Nov 20, 2020

    This looks great! I love how you built the modular shelving in front and used the pallets as the backdrop. You added drama to the entire space

Next