DIY Pallet Box Planter for Flowers.

I'm sharing how I made a mini pallet planter box for my deck table.
I made a box from pallet wood.
To make the box you, will need to cut the pallet wood into the following lengths:
Base = 2 x wood lengths at 400mm
Sides = 2 x wood lengths at 395mm
Ends = 2 x wood lengths at 175mm
(to convert to inches use an online measurement calculator)
It is a basic build:
Nail one side to each base piece.
Nail the ends in place attaching to side wood
Then nail the base pieces to the end pieces to hold it in shape.
This is the first time I have made anything like this, and I didn't think it was too hard.
Recycle some black plastic pots by spray painting in a colour of your choice.
Make plaited twine handles and attach with a staple gun to each end of the painted box.
Pot up an annual flower (like a pansy) into the painted plastic pots.
Pop them in the box and place on the centre of your deck or outdoor table.

Tracey Lee Cassin
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

Comments

Join the conversation

2 of 3 comments
Next