DIY Cutting Board Shelves
I am going to show you how to turn 10 cutting boards from the Dollar Tree into the cutest little shelf today.
To make this shelf the only things I needed were these 10 bamboo cutting boards and some glue.
Once I had the plastic off I started to build the first box.
I used a good amount of E6000 on each joint. When dried, this will hold the boards together very securely.
I also used a dab of hot glue at the end of each board to hold them in place while the E6000 is drying.
With glue on the first four boards, I placed them into a box shape.
After building the initial box, the additional boxes only needed three sides to join them up.
I used the same process of adding E6000 and several dabs of hot glue to secure each board into place.
Once the next three boards were securely in place, I added the final three to finish my shelf.
After they were all in place I left the structure overnight to make sure the glue had plenty of time to harden.
I am thrilled with how my little shelf turned out.
Once the glue was dry it was sturdy and solid and was perfect to add some height to my décor.