With Thanksgiving and Christmas being two busy holidays back to back, it's nice to have decor that is easy and budget friendly. This Transfer Image to Wood project transfers a Thanksgiving printable to one side of a piece of plywood and a Christmas printable to the other. Super easy to make and you can change decor with one flip of the wood.
I had all the supplies on hand so this project was pretty inexpensive for me. For my wood I used 1/4 inch plywood and cut it 13 x 10 1/2 inches. I wanted it just big enough for there to be a border around the image.
Once the plywood was cut I sanded the entire piece on both sides. I applied a couple coats of black chalk paint about a one to two inch frame around the board. I did this so when I sanded it later it would show through under the white paint.