Succulents and cacti are all the rage and one of the most popular decorating trends today! You find mostly smaller versions used in almost every type of settings, from elaborate weddings to everyday surroundings. I love the simplicity of these plants and wanted something larger and impactful to display. So being the crafter that I am, decided to make my own faux prickly pear cactus arrangement. For the complete tutorial visit: http://www.plumperfectandme.com/2016/07/flowering-prickly-pear-cactus-diy.html
Flowering Prickly Pear Cactus - DIY
First, create freehand patterns for the cactus pads/fruit, and trace onto foam boards.
Cutting out the foam pads and fruit was so easy using my Proxxon hot wire cutter. A knife or different type of hot wire can also be used to cut out the shapes.
Next, smooth out and round off the edges and sides of the foam pieces using a sanding block.
It really didn't take long to sand all of these.
Next, paint all of the pieces using a variety of green colors to blend.
To mimic the areoles of cactus, place random dots all over the pads with a marker. Next, remove bristles from a brush and then add a dab of hot glue over the dots. Wait a few seconds for the glue to set up and then insert the bristles into the hot glue randomly to represent spines.
You might have to hold up the bristles for a few seconds to dry erect, and then, once completely dry, cut down the bristles for a uniform overall look.
Place leftover pieces of foam into the bottom of a container and cover with dried moss and or mulch. Randomly arrange the pads into a cactus plant in the container, connecting each one with toothpicks and hot glue.
For the flowers - imagine how a cactus flower looks and cut petal shapes out of foam sheets and paint both sides and let dry. Place petals on a hot griddle for a few seconds, remove and shape with fingers.
Glue shaped petals around a foam painted circle, clockwise to form flower, leaving center clear.
To form center stamens, cut a one inch strip from foam sheet and cut thin strips three quarters the width the entire length. Lay on top of griddle until ends curl and then coil the piece, gluing end to secure.
Hot glue in center of flower.
And finally, insert toothpicks to connect and randomly glue on fruit and flowers.
- Foam board project panels - 24"x24" (HomeDepot)
- Proxxon hot wire cutter (online)
- Sanding block
- Craft paints
- Hot Glue
- Bristles, toothpicks, foam sheets, scissors
Want more details about this and other DIY projects? Check out my blog post!
Published July 16th, 2016 12:10 PM
4 of 60 comments