The Beatles Carved Wood Finish

4 Materials
In this video Rose Wilde, founder and creator of the Wood Icing® Company demonstrates how to transform a used cabinet door into a work of art, simulating a carved piece of wood.
Watch our quick run through for how to create this Carved Wood looking finish of The Beatles . Read our step by step instructions below.
Lay the stencil flat onto the surface. We use a re-positional spray adhesive to keep our stencil from moving.
Scoop a small amount of Wood Icing® Textura Paste with the Offset Knife.
Use our Wood Icing® Offset Knife to the Textura Paste over the top of the stencil. Remove the stencil right away, while the Textura Paste is still wet. Wash the stencil and let the paste dry, one to two hours or overnight.
We used a few different colors of the General Finishes Gel Stains


We used Gray, American Oak and Black
Use the "Black" General Finishes Gel Stain for the fine details.
Now watch the video again to see what you may have missed!
Suggested materials:
  • Wood Icing® Textura Paste   (Wood Icing® Company)
  • General Finishes Gel Stains   (General Finishes Company)
  • Wood Icing® Offset Knife   (Wood Icing® Company)
See all materials
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
Next