My hubby spent an hour at Lowes figuring out how to make this..I love it

Using a 1/2" threaded pipe at each end, slightly bent at the top, drill a hole in the bottom of the kettle and insert 3/8" soft rubber tubing down thru the pipe and close off the bottom of the kettle with a galvanized floor flange . Use a pond pump that will lift water 7-8 ft, follow those directions for it but to place it to the barrell,( which is a large plastic type, we were afraid a whiskey barrell would leak,) drill a hole in the outside lower edge and insert pump tubing, use silicone to seal it, the center is a flower stand and the tray is a old cooking tray.Fill barrel with water, plug it in and woa la.
my kettle fountain my hubby made

Namaws
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

Comments

Join the conversation

2 of 48 comments
Next