How to fix kitchen corner cabinet hinge?
Hi! In the house my brother-in-law purchased a number of years ago, he has a corner kitchen cabinet with a broken hinge. Can anyone identify what kind of special hinge it is and where to buy a replacement? Attached is a photo of the cabinet and a photo of the broken hinge. Thanks for any replies!
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How do I fix the hinge on my kitchen cabinet door?
My kitchen cabinet door bottom hinge screws keeps falling out. I replaced the hinge several times and changed the screws nothing seems to work in holding that door st... See more
Looks like a full cabinet overlay hinge, Home Depot has them:
https://www.homedepot.com/b/Hardware-Cabinet-Hardware-Cabinet-Hinges/Full-Overlay/N-5yc1vZc29aZ1z1s2d6
Hello they look to be available on Amazon.
Might be important to know for exact match….Are they soft close hinges?
Heres a look for your comparison
Hope this helps.
https://www.amazon.com/cabinet-hinges/b/ref=dp_bc_aui_C_4?ie=UTF8&node=511240
The easiest thing is to remove the hinge and take it with you to the home improvement store. Then you can visually just find the exact same one. These are common so you should have no problem.
Remove it and take it to your local hardware or home improvement store. You shouldn't have a problem finding one like it.
Home Depot, Lowes, all hardware stores have them
here is how to replace
https://www.youtube.com/watch?v=76eS-hc9UyI
Looks as though the hinge replacement would be readily available at a number of stores that carry these types of products. Perhaps remove the hinge(s) and take with you to insure you get the exact item needed. A customer service person should be able to help you.
If you can't remove the hinge to take into a big box store use you cell phone and take a good picture then take the phone into a place like ace hardware and show them. If you would rather check out the huge numbers they have on amazon here is a direct link:
https://www.amazon.com/hinges/b?node=511240
Indeed, the best way to match it is to remove it and bring it to your local home improvement/hardware or cabinet store. It’ll be an easy match and simple replacement.
There are so many styles based on the door operations. I agree with everyone. Remove the Hinge. Take it with you to Menards, Home Depot, or Lowes so you get the right one.
I personally suggest tom take it and bring to the hardware in your locality.
I don't know the name of it but I have seen similar. I believe you could remove this one, put in a sealed container, and take to a "old school" hardware store. We have an Ace Hardware in our area that carries an array of unusual hardware. They should be able to help you with replacing it.
Hello, they are overlay hinges, Lowes has them
https://www.lowes.ca/product/cabinet-hinges/richelieu-richelieu-2-pack-self-closing-antique-brass-cabinet-hinges-with-14-in-overlay-756889
Thanks for all the advice! I will use it next time I visit my brother-in-law.
Home Depot sells them to replace them take the hinge off and take it with you it should be standard but you never know
here is a good post https://www.thisoldhouse.com/doors/21019382/sure-cure-for-loose-hinges
Hi there, I know them as European hinges and they're great for cabinets. Here's an article with video tutorials that gives more information - https://www.rockler.com/learn/choosing-the-right-hinge-for-your-project
Buy a new one and replace it! /take it with you to the store!
Take the hinge with you to your local hardware store and they should be able to help you replace.
Hi! Well, I finally made it to my brother-in-law's, bought a 35mm 110 degree Everbilt hinge from Home Depot (only candidate they had), and tried to install it on the angled corner cabinet but it is the wrong size and/or angle. The cup hole was a good fit though. Here are 2 pics of broken KraftMaid hinge (at bottom) and new hinge where you can see difference. I will look for another store, but don't want to order online since not sure of exact match. Any interim advice appreciated. I'll update with my search.