Repair That Missing Trim

Mike Macon
by Mike Macon
6 Materials
2 Hours
That beautiful treasure you found is almost perfect. The exception is, there are a few pieces of the filigree or trim missing. The odds are you will never find a match and it can be quite expensive to have a furniture repair service recreate something that you will paint over. Here is how we do it at

This decorative area of the drawer is missing
This method of repair is actually not difficult to do if you have the knowledge, the products and tools to do it. They are simple: PAM spray (any light oil will work), a hot glue gun, small can of auto bondo with hardener, stir/mixing sticks (I use popsicle sticks) and 120 grit sandpaper. I have included pictures along with the steps.

First, there has to be an area that matches the missing filigree or trim. In my case the piece to the left of my drawers of this mahogany buffet was the same as the pieces missing on the right.
Begin by spraying the right side of the piece you want to match with PAM spray. You can use any light oil. It is merely to help in releasing the mold you will make. Take the hot glue and cover the area you are matching completely.
When the glue cools, add several layers to build up the mold you are creating.
Once that area has totally cooled, carefully lift the mold you created.
Now for the next step, the Bondo. This happens fairly quick and make sure you are not distracted during this process as the bond sets up quickly. Auto Bondo can be purchased at any auto parts store. It comes in two parts. Using the ratio of the bondo, dip out what you think will fit into your mold. Now this part is where you need to have no distractions.  
Add the hardener and mix well using the stirring stick, then place the bondo into the mold and overfill just a bit.
Quickly place the mold in the area that is missing and press in place pushing out the excess. Let this sit and set up. usually 20 minutes.
It will be warm as it sets up and when it feels room temperature it has cured and is ready to remove the mold. Slowly lift up an edge and peel the mold away.
Scrape away and sand the area free of excess bondo, Clean up the oil and you are ready to paint. 
See how easy that was? You can use this same technique on may things, like Jacobean furniture, Caiibre feet, and endless areas that are missing.
Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
3 of 73 questions
  • Tracie Belvin Tracie Belvin on Dec 10, 2020

    Can this be done on the legs where the foot has split in half?

  • Bjc4409216 Bjc4409216 on Dec 28, 2021

    Does the excess bondo not adhere to the furniture permanently?

  • Johanne Palange Johanne Palange on Dec 08, 2022

    I'm wondering something about the glue gun: can the cheap dollar store kind of glue gun work, or does it have to be the more expensive ones that get hotter, the kind that will take you skin right off if you touch it?

Join the conversation
2 of 589 comments
  • Gail Gail on Dec 12, 2020

    This is genius. Thank you.

  • Steve Hodge Steve Hodge on Jun 20, 2023

    Wow way to go there buddy...just absolutely brilliant! I never would have thought of that in a million years. The things humans can do when they're in a pinch amazes me more and more everyday!!!