Pretty Sliding Barn Door. It Slides Behind a Dresser.
Okay. you may be tired of seeing my sliding door projects, but this one is the last. My master bath is really small and the door opens into the room making it even tighter. I thought I didnt have the space for a barn door because I have a small dresser just to the right of the bathroom door. I need this small dresser there because bathroom is so small so it holds my bath towels, linens and toiletries.
The solution is to have door slide behind the dresser
This is the finished project with the sliding door closed. Decided to use a mirror again as it tends to reflect more light around the room.
Picture with the barn door opened. Slides right behind the dresser
This is the entrance to bathroom before. Sink is offset to the left and since I like to use the mirror from the medicine cabinet for applying my makeup that darn door was always in my way.
This is a 34 x 84” hollow core door. Went with the hollow core door again because it is lighter in weight. 34 x 84“ is a special order and costs a little more. I wanted to keep the trim and I wanted the door height to clear the trim.
You can see in this picture I decided to install the barn door hardware first. Wanted to get a visual as to where to place the 24 x 42” mirror. Please note that because I wanted to keep the door casing, I had to add a couple of extra washers to the screws that attach hardware to wall into studs. After deciding on placement of mirror, I glued and screwed a 1/4” x 1.75” x 27.5 “ piece of wood to the door for mirror to rest on. Glueing the wood adds more strength to the door to hold the mirror than just screws. Be sure to wait a few hours for the glue to dry.
Another view checking for placement of mirror
I rested the mirror on the wooden strip. I temporarily screwed washers in the top of mirror to hold in place. I then glued and nailed the same strip of wood around the mirror.
I glued and nailed molding around the mirror and added a wood trim frame on lower part of door. Glued moulding for added strength to hold mirror in place
In this picture you can see I have removed the door stop trim. I Covered the inside of the door jamb with toe kick which hides where the hinges and hole where the door knob piece goes into the door jamb. Caulked all around and it’s barely noticeable
Please note because I have opted to keep the trim i Haven’t found a barn door latch that will work. I could use a hook and eye closure but I prefer not to. For me, if the door is closed it’s in use. Because there is a clearance issue you cannot use a regular handle on the bathroom side of the door. I opted for a back plate of a cabinet knob. Didn’t use the knob. Just the back plate. Just enough of an edge to open and close the door. I realize this may not work for everyone.
Just tacked a tacked a flea market poster
Mitered baseboard molding to create a frame and nailed it right into wall. Couldnt use a regular frame because the door wouldn’t clear.
Mitered corners of frame. Please see my other post for tutorial on making a picture frame from molding.
Picture of my cathedral barn door in case you haven’t seen it.
Picture of my sliding barn door bedroom closet doors closed
Closet doors open.
I’m finally finished with my doors.
Hmmm. On to the next project.
Enjoyed the project?
Resources for this project:See all materials
Frequently asked questions
Have a question about this project?
Join the conversation
Michelle on Mar 05, 2022
Love this! Especially the cathedral one. We are looking to do something similar where our door would need to slide behind a piece of furniture (and perhaps we can put a half rounded cathedral mirror on the upper part of the door) I think the door will need to be about 44” wide x 80” height as our opening is a unique size. Where did you purchase the custom hollow door? Attaching a photo for your reference and advice, thank you!
Debbie on Mar 05, 2022
I ordered it from Home Depot. But that was over 3 years ago. You can make your own door. The cathedral door I made from high density board ( I think). But can be made from any wood sheet product. Most of the sheet product will be covered with the trim anyway. That’s was 4 years ago. Had Home Depot cut to size. You’ll find step by step instructions for that door in my other posts. Also it may be an option to reduce the opening by adding 2 x 4’s on each side and encase with molding. Hope that helps.
Great idea! I have almost the same exact issue 1/2 bathroom door opened in plus a closet with door outside of bathroom and also a door to go outback . All right in a little corner. To many doors! I ended up taking the door off of the bathroom as its in my bdrm and only I really use it. I have a sheet hanging over the area now. I have been wanting to put a barn door but my major issue is it will have to slide to the left.. when you slide to the right it will cover the door frame BUT the switches for the lights for the bathroom are on that left wall. Any ideas of how this can still be accomplished?
I have a question. I want to do this in my bedroom. I have a bathroom and a closet with a dresser between the two. I want to do this for both doors. They are skinny doors. Do you think I can put them on one slide? They will both fit on the wall if both are open. Does this make since? Like yours, but with a door on the other side to slide behind the dresser as well.
Have you ever done a double door? Like you my double doors open in. One blocks the toilet and the other hits the medicine cabinet. Both doors would have to slide to the left as the right is too close to the wall. Do you think one door would be too heavy? Thanks.