DIY Nightstands: IKEA LACK Table Hack
by
Engineer Your Space
(IC: blogger)
On one of my very frequent trips to IKEA, I found inexpensive LACK tables that were the perfect color to work as nightstands in my bedroom . The only problem was that they were too low for my bed. At $13 each, it was worth trying to find a way to make them work. My solution? Cut the legs of one table and stalk another table on top it!
This is a very simple project that took about an hour - all you need is a miter box and hack saw, a speed square, some masking tape and "Liquid Nails" glue.
Cover the leg with masking tape where you want to make the cut (this will protect the finish) and use a speed square to mark each side of the leg where you will cut. I made my bottom legs 4" tall.
Use a miter box and hack saw with a fine tooth blade to make the cut. After I screwed the bottom legs to the bottom table top, I used liquid nails to glue the legs of the top table to the top of the bottom table.
And just like that, I was able to have my nightstands that are the prefect height and color for my bedroom, all for just $26 each!
You can see the steps in a bit more detail in the video (skip to 3 mins 20 secs) or on my blog.
{
"id": "4622",
"alt": "",
"title": "",
"video_link": "https://www.youtube.com/embed/o0NpqLVQBUQ",
"youtube_video_id": "o0NpqLVQBUQ"
}
{
"width": 634,
"height": 357,
"showRelated": true
}
Enjoyed the project?
Want more details about this and other DIY projects? Check out my blog post!
Published March 27th, 2015 12:49 PM
Comments
Join the conversation
2 of 9 comments
-
Lynn Taylor on Jul 22, 2018
I love this! For a kids bedroom you could stack several (without cutting them down) on both sides of their bed and then use a board across the top for a bridge to display stuffed animals or whatever they collect.
-
-
Karen Daniels on Nov 30, 2018
Love this! I’m off to ikea :D
-
Frequently asked questions
Have a question about this project?