Tile Counter Goes Custom: You Can Personalize a Counter
by
Jessica Byrnes
(IC: homeowner)
A plain and ugly counter top that was a DIY, needed some work. This is a counter that is in our kitchen area - DIY kitchen from top to bottom. The general feel of the kitchen is pretty and rustic.
However, one end of the kitchen counter was plain white and ugly tile. I bought some bisque tiles from Bisque Imports of North Carolina. They are great and I have been a client for years. The old small white tiles had to be removed first. Since it was a DIY counter, I had my husband remove the whole section and lay down a new wooden counter top with plywood. It's cheap - about $25 for a 4 x 8 foot piece.
I bought some bisque tiles from Bisque Imports of North Carolina. They are great and I have been a client for years. They recently opened up a second major warehouse in Salt Lake City.
The next step was to paint very simple illustrations on the number of tiles I needed. The bisque under-glaze is from Duncan - also supplied by Bisque Imports. Another great under-glaze is Mayco - also supplied by Bisque Imports. These tiles are super cheap. You get about 24 to a box.
I am not good when it comes to original ideas for illustrations, which is why I copy. I always ask the artists if I can use their illustrations, and usually never hear back. Since I am not selling their designs, I will not get clobbered for copyrights.
The following pictures are some sample tiles that went into the overall counter top.
Then with all the tiles painted, glazed and fired (by my wonderful friend in Cortez, Colorado), I arranged the tiles and did a very bad job sticking them to the counter top.
The next step is to complete the wooden edges and tidy it up.
I hope that may give some painting enthusiasts some ideas for making their counter tops their own and 100% DIY and 100% unique. There is not another one of these in the Galaxy or the Universe.
Enjoyed the project?
Published November 3rd, 2015 4:41 PM
Comments
Join the conversation
5 of 7 comments
-
Anne Alexander on Nov 04, 2015Love your tiles, your artwork is adorable...
-
Jessica Byrnes on Oct 08, 2018
Thank you!
-
-
-
Robyn Dixon on Nov 04, 2015This is really a great idea, but were the new tiles adhered on TOP of the existing tiles?
- See 1 previous
-
Jessica Byrnes on Nov 04, 2015@Robyn Dixon Hi Robyn, Thanks and good question. I had to remove the old tiles. Since this was a DIY plywood base, we just removed the old base and installed a new piece of plywood. If you cannot take apart your counter, place a new piece of plywood on top of your old counter. It will raise the level a little as plywood is 1.4 inch or 1/2 inch thick.
-
Jessica Byrnes on Nov 04, 2015@Robyn Dixon P.S. I edited and added that to the project. Thanks.
-
Frequently asked questions
Have a question about this project?
how do you make the tiles waterproof and heat resistant? If you clean the tiles, won’t the drawing rub off?
how do u make the tiles waterproof and heat resistant? If I clean the tiles, won’t the art rub off?
what happened to the area with the beautiful huge windows and the wood counter top..I wouldnt put anything on that if your planning to..are you?? just wondering..the view is breath taking...love it its so rustic and cozy