#30DayFlip Dock Table Surf Board Gate
by
Ozzys Girl
(IC: homeowner)
Dock table from pallet wood and left over posts from old deck railing.
Our pool was being pushed down the hill so we had to build a French drain.
So new deck new gates Recycle!
Our pool was being pushed down the hill so we had to build a French drain.
So new deck new gates Recycle!
We had to dig out dirt that was pushing the pool and it rained a lot! We had to pump out water before we could dig. It was so wet.
Building French drain was heavy work thank goodness our friend let us borrow his backhoe. The big posts in front weighed 250 lbs each
Lots of lifting digging holes.
And had to make sure hubby didn't take my pole of feeders out.
After we built the frame back the new decking was going on. Went with gray so it's cooler and more nautical looking.
This is the outside of the gate .
The corners inside are each a little different decorated but are 3 posts put together with the rope!
Wanted it to be open so did the rope fence and put 2 rows of cable on bottom to keep pugs on. The back side drops off far!
We bit the bullett on decking so why not on shade. We have a sunsetter on house and love it.
My first surf boards they turned out cute! I think
They have a solar light on top they light up all night!
It was lots of work lots of mud but we did it our selves and made it just the way we wanted it
It's like we are on vacation in our own back yard!
Enjoyed the project?
Published June 5th, 2016 3:57 PM
Frequently asked questions
Have a question about this project?