25K Views
SK's Concrete Counters
by
SK on Elderberry
(IC: professional)
As we were planning the kitchen in this home, the cabinet bid was over thirty five thousand dollars. Choke. So we decided they were just boxes after all. Why couldn't we just build our own. People thought we were crazy.
Each box was build in place with 1" clear plywood. As we progressed down the line we would measure and decide what I wanted/needed and proceed to build the next one. I love cottage styling and built the upper cabinets to have glass. I knew you could order glass that looked old and wavy and that is what I choose.
The counters were poured in place. I used a red, burgundy and purple mixture with a green undercoat.
The copper backsplashes were left over from another job and I had stored them away for over ten years knowing I would find a place for them.
The sink is also concrete. we framed it in to have the look of a farmhouse sink. I placed a metal decorative curl in the front. When the forms came off I sanded, sanded, sanded. then we sealed with a wet look cement sealer.
The island is hand pounded copper. We drilled a hole where I wanted a pencil light. I love lights on islands.
Each box was build in place with 1" clear plywood. As we progressed down the line we would measure and decide what I wanted/needed and proceed to build the next one. I love cottage styling and built the upper cabinets to have glass. I knew you could order glass that looked old and wavy and that is what I choose.
The counters were poured in place. I used a red, burgundy and purple mixture with a green undercoat.
The copper backsplashes were left over from another job and I had stored them away for over ten years knowing I would find a place for them.
The sink is also concrete. we framed it in to have the look of a farmhouse sink. I placed a metal decorative curl in the front. When the forms came off I sanded, sanded, sanded. then we sealed with a wet look cement sealer.
The island is hand pounded copper. We drilled a hole where I wanted a pencil light. I love lights on islands.
Enjoyed the project?
Published March 10th, 2014 3:43 PM
Comments
Join the conversation
4 of 135 comments
-
Katherine Howard Jones on Jun 28, 2016Wow, so talented. I'm very impressed with the look and even more so that it was from scratch.
-
-
Judy on Jan 30, 2017Just love the kitchen sink. The whole thing is just beautiful. Want a farm sink, but they are so pricey. Was the poured sink hard to do?
-
SK on Elderberry on Jan 30, 2017Hi Judy. I actually made the sink by using the backside of an old metal sink. Using the same method as paper mache. I used cement instead. layer upon layer with fiberglass mesh in between the six thin layers of cement. After the cement was cured I sanded and painted with a copper paint. Cost about $50.00. Good luck. Have some fun. SK Sartell sksartell.blogspot.com
-
-
Frequently asked questions
Have a question about this project?