Stand Your Mirror On Its Head
So amidst the parts and pieces in my treasure room has been this dresser mirror. I have waited for the right dresser to come along...until I saw one turned upside down.
The materials I used were the mirror and a 1X6 piece of pine. The first task was to measure the bottom of the mirror and cut the board to fit. I attached the board to the bottom using 1 1/2 inch finish screws.
Knowing that this will be carrying a lot of the weight of the mirror, I used 8 screws.
I next taped the mirror and painted using Valspar Pure White paint. I distressed using my brush and then covered with a clear wax.
The last step was to support this heavy mirror to the top. Using a 4X12 piece of plywood, I secured the back of the shelf to the top of the mirror. I also made sure the hanging supports were heavy duty.
The mirror shelf was a relatively easy project that makes a great display in any room in the house.
Enjoyed the project?
Suggested materials:
- 1X6 plywood. (Mennards)
- Valspar Pute White paint and primer. (Ace Hardware)
Comments
Join the conversation
-
-
Gary Hardman on Jan 27, 2019
Thanks Wendy
-
-
-
-
Gary Hardman on Jan 22, 2020
Thanks Megan
-
-
Frequently asked questions
Have a question about this project?
How did you attach to wall
How did you attach it to the wall